|
850 / S70 & V70 '96-'99 / C70 '97-'05 General Forum for the 850 and P80-platform 70-series models |
Information |
|
PS Pulley toolViews : 492 Replies : 12Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jan 5th, 2019, 11:35 | #1 |
notnoRmal
Last Online: Feb 1st, 2021 15:12
Join Date: Feb 2012
Location: Ascot
|
PS Pulley tool
Hi All. I've been a member for a few years now and never posted, but this forum has provided me with so much information.Its embarrassing to now post wanting help. My Indie Dealer is fitting a new power steering pump (new from Volvo) but he doesn't have the pulley tools to fit. does anyone know where I can purchase/borrow one. I am in the Camberley area.
My car is a V70R 1998 and I think the part numbers are 9995443, 999444
__________________
1998 V70R SAFFRON 150.000M |
Jan 5th, 2019, 18:32 | #2 |
VOC Member
Last Online: Yesterday 22:50
Join Date: Mar 2008
Location: Northampton
|
I recently bought some Volvo tools from Skandix in Germany for the C70.
They were very easy to deal with and the tools arrived a couple of weeks after ordering. I don't know if they will have the tools you need, but it might be worth a look.
__________________
2001 V40 2.0lt Sport lux - Daily Driver. 174k miles. 2003 C70 2.4 GT Convertible - Garage Queen. 65k miles. http://www.neptuno6benagil.com |
Jan 5th, 2019, 22:27 | #3 |
Spannering since birth
Last Online: Apr 21st, 2024 18:52
Join Date: Jul 2006
Location: North Oxon
|
I thought the PAS pumps came with the pulley already fitted ?
__________________
V70 D5 eu4 manual M66 2006 > XC90 brake conversion, stage 2 VDASH remap. BMW R1200GS BMW R1100GS (GS Addict) |
Jan 6th, 2019, 09:26 | #4 |
notnoRmal
Last Online: Feb 1st, 2021 15:12
Join Date: Feb 2012
Location: Ascot
|
I thought they did too!!! but its a genuine one direct from volvo.
I will check out Skandix
__________________
1998 V70R SAFFRON 150.000M |
Jan 6th, 2019, 09:41 | #5 |
Master Member
Last Online: Apr 23rd, 2024 17:46
Join Date: Jun 2018
Location: Presteigne, mid Wales
|
Not usually supplied with the pulley...Found this, which may help...
Please note, when installing the pulley to this pump unit a special tool must be used which screws into the centre of the shaft, so that pressure is not put onto the oil seal or internals of the pump. The pulley may not be pressed on in the normal manner, as this will immediately damage the seal and possibly the pump unit itself. This occurrence would not be covered by the warranty |
Jan 6th, 2019, 14:05 | #6 |
notnoRmal
Last Online: Feb 1st, 2021 15:12
Join Date: Feb 2012
Location: Ascot
|
Thanks for that information" Volvo Again"
I will have to scrap plan B then, which was to take it to an old school mechanic I know who's motto is "there is always a way" !!!
__________________
1998 V70R SAFFRON 150.000M |
Jan 6th, 2019, 14:15 | #7 |
Master Member
Last Online: Apr 23rd, 2024 17:46
Join Date: Jun 2018
Location: Presteigne, mid Wales
|
Would it not be easier to get a used pump complete with pulley?
|
Jan 6th, 2019, 14:33 | #8 |
notnoRmal
Last Online: Feb 1st, 2021 15:12
Join Date: Feb 2012
Location: Ascot
|
I'm trying to find one right now, there are so many different ones out there!
__________________
1998 V70R SAFFRON 150.000M |
Jan 6th, 2019, 14:34 | #9 |
notnoRmal
Last Online: Feb 1st, 2021 15:12
Join Date: Feb 2012
Location: Ascot
|
1998 was a change over year I think, just got to be careful I don't get the wrong one.
__________________
1998 V70R SAFFRON 150.000M |
Jan 6th, 2019, 16:07 | #10 |
Spannering since birth
Last Online: Apr 21st, 2024 18:52
Join Date: Jul 2006
Location: North Oxon
|
Make sure you check the diameter of the pulley on the old pump & match it - there are different diameter pulleys out there, which affect the length of the belt and the position of the tensioner wheel when the belt is fitted.
__________________
V70 D5 eu4 manual M66 2006 > XC90 brake conversion, stage 2 VDASH remap. BMW R1200GS BMW R1100GS (GS Addict) |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|