Volvo Community Forum. The Forums of the Volvo Owners Club

Forum Rules Volvo Owners Club About VOC Volvo Gallery Links Volvo History Volvo Press
Go Back   Volvo Owners Club Forum > "Technical Topics" > S60 & V60 '11-'18 / XC60 '09-'17 General

Notices

S60 & V60 '11-'18 / XC60 '09-'17 General Forum for the P3-platform 60-series models

Information
  • VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
  • AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
  • AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Thread Informations

A £1.50 engine upgrade for D4 VEA owners

Views : 20466

Replies : 51

Users Viewing This Thread :  

Reply
 
Thread Tools Display Modes
Old Feb 13th, 2015, 15:06   #1
The Tinkerer
I've Been Banned
 

Last Online: Jun 17th, 2016 11:39
Join Date: Feb 2015
Location: Stirling
Default A £1.50 engine upgrade for D4 VEA owners

I've been very happy with my VEA D4-engined car since getting it last year, but recently I made a simple tweak which has made me even happier with it, improving part-throttle pick up and throttle response, especially in the up-to-2,500rpm range.

Having a look under the bonnet, I noticed that the vacuum hose highlighted in the image below was curved at a rather sharp angle:



That hose delivers vacuum to the actuator that controls the bypass valve for the high-pressure (smaller) turbo. At idle, or when there is zero throttle input, the bypass valve is open as there is no vacuum in the hose. The open bypass valve allows the exhaust gas to flow equally to the high-pressure smaller) and low-pressure (larger) turbos. This minimises boost pressure at low rpm / zero throttle.

When you touch the throttle, the solenoid switches the vacuum supply to the hose, and the actuator closes the bypass valve. This diverts all the exhaust gas to the high pressure (smaller) turbo, to quickly increase boost pressure off-idle. It's this hose and bypass valve that basically governs driveability and throttle response in everyday driving conditions.

With the hose curving at a sharp angle, I wondered if it wasn't narrowing or kinking the internal diameter of the hose, reducing the rate of vacuum increase seen at the actuator - thereby affecting the bypass valve actuation.

The factory-fit hose is an approx 15cm length of conventional 6mm internal diameter, 11mm external diameter rubber vacuum hose. It's only just long enough to fit between the solenoid and the actuator.

I replaced it with a 20cm length of 6mm ID/11mm OD vacuum hose from my local car parts shop. The extra 5cm length is easily enough to allow a nice, smooth rounded curve in the hose with no risk of it narrowing or kinking. The factory hose simply pulls off the barbed nipples on the solenoid and actuator, and the new hose fitted simply by pushing it in place. You don't even have to remove the engine cover to do it.

Total cost: £1.50 for a new piece of hose. Total time: 5 minutes. Throttle response is now more sensitive, sharper and more positive around town and on the open road. It was good before, but this has made it even better.

Of course, this particular vacuum hose was a just a bit too short on my car. Other people's cars might have a slightly longer piece of hose fitted from the factory, in which case they probably won't experience any difference from swapping the hose. But I'd recommend any owner of a car with a D4 VEA motor should have a look under their bonnet to check if their car might benefit.

Last edited by The Tinkerer; Feb 13th, 2015 at 15:09.
The Tinkerer is offline   Reply With Quote
Old Feb 13th, 2015, 16:25   #2
Flux
Premier Member
 

Last Online: Dec 20th, 2017 15:16
Join Date: Nov 2013
Location: North
Default

Thanks for that info..............only would that be classed as a modification and (potentially) invalidate warranty?

I know that might sound a little daft as you haven't effectively 'modified' any aspect of the telemetry but you know how any excuses can be given sometimes ..... .

--------------------------------------------------------------

A few minutes later.............the post just reminded me that I need to add some screen wash. Had a look but my engine doesn't look anything like the one on the picture (OK I know it's got an engine cover) so will be leaving mine well alone as would probably end up doing something fatal and the tortoise might return...and not leave....or tell the dealer I've been 'tinkering'.....just like The Tinkerer!
__________________
XC60 181 FWD R Design Lux Nav Geartronic - MY14.5

Last edited by Flux; Feb 13th, 2015 at 16:46.
Flux is offline   Reply With Quote
Old Feb 13th, 2015, 16:40   #3
The Tinkerer
I've Been Banned
 

Last Online: Jun 17th, 2016 11:39
Join Date: Feb 2015
Location: Stirling
Default

Quote:
Originally Posted by Flux View Post
Thanks for that info..............only would that be classed as a modification and (potentially) invalidate warranty?

I know that might sound a little daft as you haven't effectively 'modified' any aspect of the telemetry but you know how any excuses can be given sometimes ..... .
Simple - keep the original factory piece of hose and swap at service time.

Also, the above pic shows the engine from the rear (i.e. from the side nearest the bulkhead). I will try and get an underbonnet picture that highlights where the hose is, but it's fairly easy to find. It's at the back of the engine bay, just behind the top right-hand side of the engine cover as you look at it with the bonnet open.

Last edited by The Tinkerer; Feb 13th, 2015 at 16:44.
The Tinkerer is offline   Reply With Quote
Old Feb 13th, 2015, 19:38   #4
Gilesme
Senior Member
 

Last Online: Dec 5th, 2023 12:58
Join Date: Aug 2014
Location: Lytham
Default

impressive !

from the pick above i wonder if the tube is so short and kinked to meet a height restriction for a certain installation ?
Gilesme is offline   Reply With Quote
Old Feb 13th, 2015, 23:12   #5
The Tinkerer
I've Been Banned
 

Last Online: Jun 17th, 2016 11:39
Join Date: Feb 2015
Location: Stirling
Default

Quote:
Originally Posted by Gilesme View Post
from the pic above i wonder if the tube is so short and kinked to meet a height restriction for a certain installation ?
Even with my custom 5cm longer hose, it's still lower than the top of the engine cover so there's loads of clearance all around, both under the bonnet and from the bulkhead.

I believe it's simple cost-accounting by Volvo - using the minimum amounts of material possible.
The Tinkerer is offline   Reply With Quote
Old Mar 3rd, 2015, 17:29   #6
The Tinkerer
I've Been Banned
 

Last Online: Jun 17th, 2016 11:39
Join Date: Feb 2015
Location: Stirling
Default

A quick update for anyone interested in this little mod. I did it 3 weeks ago and it really has noticeably improved driveability and pickup in all conditions - urban / town driving and open-road / motorway.

I measured the factory-fitted hose that I removed from mine and it is 15.6cm in length, which was just a bit too short to connect the vacuum solenoid to the actuator without a sharp curve.

I firmly believe that when vacuum is switched to the hose (which only happens when you touch the throttle), the sharp curve in the hose was sometimes being tightened by the sucking action, restricting the vacuum seen at the actuator.

My replacement silicon hose (6mm ID, 11mm OD) is 20cm long, making a nice smooth curve.
The Tinkerer is offline   Reply With Quote
Old Mar 22nd, 2015, 19:10   #7
volvorocks
Rodney
 
volvorocks's Avatar
 

Last Online: Aug 4th, 2016 06:02
Join Date: Jan 2011
Location: On The Street
Default

Thought I would bump this thread as it is interesting and useful.

Regards
volvorocks is offline   Reply With Quote
The Following 2 Users Say Thank You to volvorocks For This Useful Post:
Old Mar 22nd, 2015, 20:08   #8
GMcL
0's and 1's
 
GMcL's Avatar
 

Last Online: Today 03:14
Join Date: Nov 2006
Location: -
Default

The reason being ? The ongoing turtle message.
__________________
2011 Volvo S60 D3 R-design Premium - 2020 Focus ST estate automatic - 2020 KIA eSoul 150kW 64kwh EV

Previous: 2005 Volvo S60 D5 Sport - 2017 Focus RS
GMcL is offline   Reply With Quote
Old Mar 22nd, 2015, 20:11   #9
volvorocks
Rodney
 
volvorocks's Avatar
 

Last Online: Aug 4th, 2016 06:02
Join Date: Jan 2011
Location: On The Street
Default

Yes hence why I linked to it, and as post #7 plus when I first read it I thought 'interesting that,worth remembering for a later date'

Regards
volvorocks is offline   Reply With Quote
The Following 2 Users Say Thank You to volvorocks For This Useful Post:
Old Mar 23rd, 2015, 00:24   #10
RoyMacDonald
VOC Member
 
RoyMacDonald's Avatar
 

Last Online: Feb 1st, 2023 12:27
Join Date: May 2007
Location: Rye, East Sussex
Default

Quote:
Originally Posted by The Tinkerer View Post
Even with my custom 5cm longer hose, it's still lower than the top of the engine cover so there's loads of clearance all around, both under the bonnet and from the bulkhead.

I believe it's simple cost-accounting by Volvo - using the minimum amounts of material possible.
Computer probably said it was long enough. They are not owned by Ford anymore.
__________________
1984 245 SE 1986 345 SE Auto
1991 940 TD Auto 2003 XC90 D5 SE AWD Geartronic2002 V70 D5 SE Auto 2014 V40 D2 SE Tiptronic Cross Country 2017 V40 D2 Cross Country Geartronic Pro 2015 XC60 D5 Polestar SE Lux Nav AWD Geartronic
RoyMacDonald is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 15:34.


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.