Remote Cenral Locking - Page 2

Philip Fisher · Jan 2nd, 2004, 07:25

I have one for my car that has sat without a battery for about a year. When I get a new battery, how do I re-program it?

Also, if I bought one off E-Bay, how would I program it to my car?

Cheers

IC · Jan 2nd, 2004, 09:06

Philip, as far as I know the V70 remotes can only be programmed at the dealer.

Iain C

sholtby · Jan 2nd, 2004, 10:14

I have just fixed my remote as follows..

Remove battery and cover using a 2p coin

Price back cover off using a pen knife blade, starting at the slot closest to the metal ring.

Circuit board then falls out.

Spray WD40 over the 2 switches and wipe off any gunk. Spray again and press the switches lots of times to work the WD40 into the switch.

On reassembling you can feel the switches have a much more positive action and he car locks/unlocks with every press of the button.

Didn't see any dry solder joints in my remote but worth checking.

Simon

95 T5

ShadeTek · Jan 2nd, 2004, 11:42

I remember there is a site which can repair fobs. I think it's this one.

http://www.bridgwater-electronics.co.uk/?

Jan 2nd, 2004, 07:25	#11
Philip Fisher Premier Member Last Online: Yesterday 18:20 Join Date: Dec 2002 Location: Sheffield	RE: Remote Cenral Locking I have one for my car that has sat without a battery for about a year. When I get a new battery, how do I re-program it? Also, if I bought one off E-Bay, how would I program it to my car? Cheers __________________ Currently:- MY16 XC90 T8 Momentum, Magic Blue 174k miles. MY17 V60 T4 Power Blue. Previously:- 1997 V70 T5 exPolice; 2005 V50 2.0D; 2013 XC70 D5

Jan 2nd, 2004, 09:06	#12
IC S60R/V70R Last Online: Apr 27th, 2024 11:54 Join Date: Dec 2002 Location: Brumbeldore View Photos By: IC	RE: Remote Cenral Locking Philip, as far as I know the V70 remotes can only be programmed at the dealer. Iain C

Jan 2nd, 2004, 10:14	#13
sholtby Premier Member Last Online: May 26th, 2010 20:17 Join Date: Dec 2002 Location: north east	RE: Remote Cenral Locking I have just fixed my remote as follows.. Remove battery and cover using a 2p coin Price back cover off using a pen knife blade, starting at the slot closest to the metal ring. Circuit board then falls out. Spray WD40 over the 2 switches and wipe off any gunk. Spray again and press the switches lots of times to work the WD40 into the switch. On reassembling you can feel the switches have a much more positive action and he car locks/unlocks with every press of the button. Didn't see any dry solder joints in my remote but worth checking. Simon 95 T5

Jan 2nd, 2004, 11:42	#14
ShadeTek Premier Member Last Online: Apr 20th, 2024 19:38 Join Date: Dec 2002 Location: Renfrewshire View Photos By: ShadeTek	RE: Remote Cenral Locking I remember there is a site which can repair fobs. I think it's this one. http://www.bridgwater-electronics.co.uk/? __________________ Tek-Emo Villis Emo Bis V70 SE NAV 1.6 D2 2015MY POWERSHIFT, D4162T, 93000miles, RED. /VOL FCR/PEPER OBD2/Acron 9135 OBD2/L.E.D Flasher/VDASH/ANCEL BA301/Topdon Top Scan

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)