|
S40 / V40 '96-'04 General Forum for the Volvo S40 and V40 (Classic) Series from 1995-2004. |
Information |
|
Are HIDs interchangeable with a non HID car?Views : 470 Replies : 7Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Oct 19th, 2019, 11:24 | #1 |
Premier Member
Last Online: Apr 13th, 2022 09:41
Join Date: Jul 2014
Location: Beccles
|
Are HIDs interchangeable with a non HID car?
Hi all, as the title suggests really, realistically speaking the t4 is dead as it just needs too much work, so I'm wondering if I can take the HIDs out and fit them to the 2.0 se, presumably I'll need the lights themselves, the ballasts, level switch from the rear suspension arm and the associated wiring, is it that simple?
Many thanks in advance
__________________
02 V40 T4 S, "Sargent silver" she's back!
|
Oct 19th, 2019, 19:06 | #2 |
Premier Member
Last Online: Yesterday 18:24
Join Date: Jun 2016
Location: S****horpe
|
Can't see why it would be a difficult swap-others will no doubt know for sure-don't forget that unless the SE already has them you'll also need the headlamp washers and pump/pipework to make them work.
|
The Following User Says Thank You to Dippydog For This Useful Post: |
Oct 19th, 2019, 20:10 | #3 |
Premier Member
Last Online: Nov 15th, 2022 21:34
Join Date: Apr 2010
Location: London / Essex
|
The headlamps on their own, are plug and play. With regards to the level bracket at the back, you will find out that you also need the rear arm, as it has a small bracket/ballpoint where the level sensor attaches too. Then, when it comes to the wiring, it will be an absolute nightmare, as you will have to remove the entire interior, including the dashboard to trace where each and one of the wires goes to.
I was thinking of doing the same thing, but in the end, I gave up and just fitted the xenons on the car and left the manual headlight adjuster switch to control them.
__________________
Current car: 2002 S40 1.9D, 1992 240SE Nullius in Verba
|
The Following User Says Thank You to gatos For This Useful Post: |
Oct 20th, 2019, 12:09 | #4 |
Premier Member
Last Online: Apr 13th, 2022 09:41
Join Date: Jul 2014
Location: Beccles
|
Yeah that sounds like a right pig of a job, I'm unsure on the legality of not having the self levelling though, plus the wash wipe has never worked on either car, or on the orange one, is there an x40 on the planet where the system actually works haha, but yeah I think I'll just stick some nightbreakers in instead lol.
__________________
02 V40 T4 S, "Sargent silver" she's back!
|
Oct 20th, 2019, 15:47 | #5 |
Master Member
Last Online: Apr 16th, 2024 06:48
Join Date: Jan 2015
Location: Blackpool
|
MOT tester here again , you can retrofit HID projector light units into a vehicle that originally had reflector style lights . YOU CANNOT just fit HID or LED lights into reflector style headlights to use as dip beam light .
You must ensure that the levelling motors are refitted & do move the lights when operated , not every car has self levelling units & during test we follow the manual 4.1.5. Levelling devices Make sure any manual headlamp levelling devices (driver controls) work by: switching on the dipped beam headlamps operating the manual levelling device checking that the headlamp beams move up and down returning the levelling device control to its original position Vehicles with high intensity discharge (HID) or LED dipped beam headlamps may be fitted with a suspension or headlamp self-levelling system. If these systems have been fitted, they must work. Sometimes it is not easy to determine if the self-levelling systems work. In such cases you should give the benefit of the doubt. My V70 P1 was equipped with ABM projector lights & were stunning once equipped with LED light sources .
__________________
To stupidity & beyond |
The Following 3 Users Say Thank You to dingov70 For This Useful Post: |
Oct 20th, 2019, 18:34 | #6 |
Premier Member
Last Online: Apr 13th, 2022 09:41
Join Date: Jul 2014
Location: Beccles
|
Thanks, that's very informative, so if I were to fit the hid lights (the whole units, not trying to put hid bulbs in the original lights or anything silly like that) I shouldn't have a problem with the automatic levelling then, because it won't be there and so can't be tested if it doesn't exist? I am concerned about the wash wipe though as thats never worked, all 3 of the v40s I've had have been equipped with it but neither the wash or the wipe part has ever worked at all.
__________________
02 V40 T4 S, "Sargent silver" she's back!
|
Oct 20th, 2019, 19:57 | #7 |
Master Member
Last Online: Apr 16th, 2024 06:48
Join Date: Jan 2015
Location: Blackpool
|
In a nut shell YES , go ahead . Remember if it NOT fitted , we cannot test it & we have to give the benefit of doubt , so remove wipers if you want . The test regs refer to washer systems IF FITTED , insert blanking grommets to holes & all is good
__________________
To stupidity & beyond |
The Following 2 Users Say Thank You to dingov70 For This Useful Post: |
Oct 21st, 2019, 18:00 | #8 |
Premier Member
Last Online: Apr 13th, 2022 09:41
Join Date: Jul 2014
Location: Beccles
|
That's great, that's what I'll do then, depending on how the SE gets on at its mot at the beginning of December all of this may be academic, but provided it's not a grotesque amount of work to get it through I'll be doing this swap for sure, thanks again
__________________
02 V40 T4 S, "Sargent silver" she's back!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|