C30 D5 Jetex Exhaust ?

[Scriptss]

I was speaking to a company about an exhaust for my Volvo c30 D5(2007) and they said the Jetex exhaust for the T5 should fit without any problems, I've had a look online and the OEM D5 exhaust and the Jetex T5 exhaust do look almost identical.

Has anyone tried fitting a T5 exhaust to a D5 ? and if so did you have to do any cutting/welding/etc or was it a direct fit ?

[marc]

I think the back box is most certainly the same, not sure about cat back of the T5 system though. If you don't get any joy here, check out C30crew.com as there are quite a few modded D5s there and some with after market exhausts.

[Scriptss]

Originally Posted by marc

I think the back box is most certainly the same, not sure about cat back of the T5 system though. If you don't get any joy here, check out C30crew.com as there are quite a few modded D5s there and some with after market exhausts.

Thanks Marc il go and post the question over there ans hopefully get some answers

[Scriptss]

for anyone interested for future reference I fitted the jetex system designed for the T5 model on saturday and it was a direct fit

[marc]

How does it look and sound?

[red baron]

Good job, I've been flirting with the idea of putting a Jetex system on my V50 D5, might leave just the downpipe on for a day or so

[phil1968]

Originally Posted by marc

How does it look and sound?

Probably very little or no louder than stock (I have a straight-pipe system on my C70 D5 from the cat back, with no rear box & it's still not that noisy, the turbo muffles a fair bit of the noise).