1998 V70 2.3 T5 ABS codes? - Page 2

turboboy · Oct 22nd, 2020, 08:43

Quote:

Originally Posted by NewbieV70T5

I got from here:

https://www.volvoforums.org.uk/showthread.php?t=81259

That list is for later (2000>) V70s. Would they be accurate for for a 1998 MY?

Volvofreak2 · Oct 22nd, 2020, 19:32

Hej Ray,
why don't you just check the rings and sensors first? Easy to do and cost no money. Lift the car in the front, so both wheels are free. Remove the wheels. The rings are at the end of the driveshafts. Check for dirt, between ring and sensor, rost, that makes the teeth of the ring "unreadable" and if the ring is broken. The sensor can be checked as follows: Unplug the wire. Take a multimeter and measure the resistance. It should be between 1040 and 1160 Ohm. Then switch to Voltage and turn the driveshaft. When turning it, the multimeter should indicate some voltage. That shows, that the sensor is producing signals.

Cheers Gernot

Oct 22nd, 2020, 19:32	#12
Volvofreak2 Member Last Online: Aug 1st, 2021 08:21 Join Date: Feb 2019 Location: Landshut	Hej Ray, why don't you just check the rings and sensors first? Easy to do and cost no money. Lift the car in the front, so both wheels are free. Remove the wheels. The rings are at the end of the driveshafts. Check for dirt, between ring and sensor, rost, that makes the teeth of the ring "unreadable" and if the ring is broken. The sensor can be checked as follows: Unplug the wire. Take a multimeter and measure the resistance. It should be between 1040 and 1160 Ohm. Then switch to Voltage and turn the driveshaft. When turning it, the multimeter should indicate some voltage. That shows, that the sensor is producing signals. Cheers Gernot __________________ tack för hjälpen! current: V70 I, B5254T MY99, TME exhaustpipe, 850 R MY96, 850 GLT 20V B5254S, Mj 94 previous: V70 I, B5252S, V70 I, B5254S2, killed by a parcel service driver

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)