|
S80 '06-'16 / V70 & XC70 '07-'16 General Forum for the P3-platform S80 and 70-series models |
Information |
|
V70 Mk3 D5 Auto, Immobiliser Error No Shift Beyond 1st GearViews : 404 Replies : 0Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Feb 13th, 2020, 14:26 | #1 |
V70 2008 D5 Owner
Last Online: Nov 20th, 2021 17:46
Join Date: Oct 2014
Location: London
|
V70 Mk3 D5 Auto, Immobiliser Error No Shift Beyond 1st Gear
Hi,
V70 2008 D5 2.4 Auto - Wont shift beyond 1st Auto or Manually: Had our dog in car whilst at shop so left unlocked. Got back in, started ok and it stalled within 2 seconds. I noticed an 'immobiliser' message on the instrument reader (not 100% sure exactly what it said). I restarted believing perhaps the immobiliser had cut in and again it started ok and then stopped within 2 seconds. I paused, locked the car with remote & unlocked again with this time it started fine and stayed running. Upon reversing ok i pulled away noting that it wouldn't change out of 1st gear. I additionally tried manual gear selection but that wouldn't change up either. I crawled home at 15mph in 1st gear ok. Actions since: I done a manual maintenance reset since the message has been present awaiting a service. Upon restarting & driving same issue, stuck in 1st gear. I plugged in a U480 code reader however this hasn't displayed any faults. It feels to me like a limp type mode is stuck in however rather than capping revs, it's preventing shifting anything beyond 1st gear & reverse, or perhaps an electrical sensor or something? Still shifts fine & smooth to Drive or Reverse and always had smooth gear changes - Any assistance appreciated as just concerned spending a fortune with a garage for what could be a smaller less expensive component fix. Thanks |
Tags |
stuck 1st gear first |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|