|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
Antiskid steering sensor warningViews : 631 Replies : 5Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Sep 18th, 2019, 20:51 | #1 |
New Member
Last Online: Aug 10th, 2020 08:05
Join Date: Sep 2019
Location: Selby
|
Antiskid steering sensor warning
Sorry to ask this one as I see it's a popular one
Anyone help point me towards the most likely components needed I've plugged Vida in and got the following non reset able errors; BCM0109 communication between communicating control units SAS internal fault BCM0115 communication between communicating control units SAS signal missing SAS 0024 steering angle sensor signal missing Can I run any tests on vida or other test gear to determine exactly what's needed |
Sep 19th, 2019, 20:10 | #2 | |
Junior Member
Last Online: Jun 21st, 2023 17:45
Join Date: Dec 2011
Location: northwich
|
Quote:
__________________
2003 Volvo v70 d5 manual |
|
Sep 20th, 2019, 21:44 | #3 |
Curmudgeon with a turbo
Last Online: Jul 1st, 2020 17:48
Join Date: Nov 2014
Location: Congleton
|
May not be pertinent here, but I believe the Climate control's Air Quality Sensor can cause various CAN communication issues if faulty/not an original part.
__________________
(current) '06 P2 S80 D5 SE LUX, Met. Gold/Black leather, 200k (past)'99 P1.5 V40 SE 1.8 (1731cc), Metallic Peacock Blue-Green, Black Leather, Winter Pack. 101k (past) '88 340 GL 1.7, gifted to me with "slipping clutch" that was a sticky linkage |
Sep 21st, 2019, 05:56 | #4 |
GoldMember
Last Online: Today 22:46
Join Date: Jul 2010
Location: Kent, UK
|
s a s
The sas module is behind the steering wheel, you can get occasional errors which usually reset themselves and usually when your moving the steering full lock, from a vague guess perhaps something has come adrift with the connection to the sas, have you tried taking the wheel off to have a look ?, could be the module is dead, theyre about £200 ish , i had mine replaced some years back after more persistent error messages, and there is a recal routine that needs running from vida if you replace the module..
|
Sep 22nd, 2019, 19:21 | #5 |
New Member
Last Online: Aug 10th, 2020 08:05
Join Date: Sep 2019
Location: Selby
|
Problem now solved.
I bought a replacement clockspring, complete with the SAS on the back. Turns out the previous owner had bought and fitted 2 clocksprings without the SAS, so no wonder it was seeing an error. Correct part fitted, and reset everything with my code reader, and bingo....No Antiskid warning. |
Sep 22nd, 2019, 19:51 | #6 |
Senior Member
Last Online: Apr 19th, 2024 21:13
Join Date: Jun 2010
Location: Shropshire
|
Hope you don't mind me asking was the SAS expensive from volvo?
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|