|
Diesel Engines A forum dedicated to diesel engines fitted to Volvo cars. See the first post in this forum for a list of the diesel engines. |
Information |
|
Using the ppc code reader with MSA15.8Views : 944 Replies : 0Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Oct 30th, 2011, 17:15 | #1 |
VOC Member
Last Online: Apr 24th, 2024 13:58
Join Date: Dec 2002
Location: Bristol
|
Using the ppc code reader with MSA15.8
Hi, I have now used a ppc code reader on my 2000 W reg V70 Tdi classic (P1) with the D5252T engine and Bosch MSA 15.8. I have found the following:
1. It does not appear to read SRS module DTCs - my SRS light is on and an airbag fault was indicated by a dealer scan (with a VCT2000) some time back. The ppc appears to poll the SRS module but finds no DTC. Has anyone else found this problem? 2. The ppc reads the ECM module. Again, I have a known egr DTC from a previous dealer scan which is ECM0038. This relates to egr flow level, HOWEVER the bsr supplied code list gives 0038 as "rear HO2S bank 1 heating" i.e. the code is correct but the description is not. It seems that some codes may be incorrectly described via the bsr ppc info so it's best to cross-reference the code with the VADIS code definitions (of course you need VADIS). I'd be interested in comments from those of you who've used a ppc scanner on my engine with MSA15.8. Regards. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|