|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
Heated seats helpViews : 444 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 30th, 2019, 14:30 | #1 |
New Member
Last Online: Nov 30th, 2019 16:20
Join Date: Oct 2019
Location: Salisbury
|
Heated seats help
Can anyone of you kindly tell me if I have the correct wiring to install some oem heated seats. Here is what's under my seats currently. The seats I'm looking to buy also come with the centre console and buttons.
|
Dec 2nd, 2019, 15:11 | #2 |
WowIcanwriteAnythingHere!
Last Online: Mar 26th, 2024 16:05
Join Date: May 2016
Location: Dublin/Meath
|
Wiring loom is most likely OK, problem is you need dealership visit to program those in (software pack update). Otherwise heating cant be activated from waterfall buttons, just keep that in mind.
__________________
2005 V50 T5AWD M66, Stage1 Hilton tune E-focus torque mount, E46 bi-xenon retrofit v2 , (also available in PDF form), DTSC fully-off mod, Brembo discs+ATE ceramic pads |
Dec 2nd, 2019, 16:24 | #3 | |
Experienced Member
Last Online: Today 00:05
Join Date: Jun 2007
Location: L/H side
|
Quote:
the wiring colours you should have in both front seat plugs are : 2 x yellow wires , the temperature sensor 2 x black wires for the backrest element A brown wire and a grey wire for the seat base element .. you also need the heated seat module fixed to the seat base .. However non of this will work as the car was not specified with Heated seats at the factory , and you will have no switches .. The system is a network system so the switch doesn't turn the elements on directly it sends a message to request them to the seat heater control module ..
__________________
My comments are only based on my opinions and vast experience . |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|