|
S80 '06-'16 / V70 & XC70 '07-'16 General Forum for the P3-platform S80 and 70-series models |
Information |
|
blind spot syst. service requiredViews : 5453 Replies : 18Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Feb 13th, 2015, 20:09 | #1 |
Junior Member
Last Online: Mar 4th, 2024 05:51
Join Date: Jun 2014
Location: chicago
|
blind spot syst. service required
2008
Volvo Xc70 Vin; YV4BZ982581038108 I have this car with Blind spot message, i scan the system but failed to get any info relating to this, checking on the scan tool among volvo multi controllers list, there is no controller name BLIS or blind spot module... this car come with camera fitted to the driving mirror, now when i scan all controllers all things were okay except PDM which has rear right window failure, please i want to know how to solve this problem in other to get the message off, i look on wiring schematics but there is no related info about it, so please help me which module has this incorporate blind spot and what must i check out for... because the panel or cluster has this message display continuously |
Feb 13th, 2015, 20:34 | #2 | |
Experienced Member
Last Online: Today 22:51
Join Date: Jun 2007
Location: L/H side
|
Quote:
__________________
My comments are only based on my opinions and vast experience . |
|
The Following User Says Thank You to Clan For This Useful Post: |
Feb 14th, 2015, 05:05 | #3 | |
Junior Member
Last Online: Mar 4th, 2024 05:51
Join Date: Jun 2014
Location: chicago
|
Quote:
Now the scan tool i have is Launch master x431, which reads all the controllers but i cannot find the blind spot module, could it be that there is a failure to that module or could it be that the car did not come with that module or what at all need to be done, how does the blind spot works, anyone with wiring schematic for his system |
|
Feb 14th, 2015, 09:16 | #4 |
Allons-y!
Last Online: Jun 8th, 2020 15:32
Join Date: Dec 2004
Location: Winchester
|
Read Clan's post again - the BLIS system works through the door module.
|
Feb 14th, 2015, 14:50 | #5 | |
Experienced Member
Last Online: Today 22:51
Join Date: Jun 2007
Location: L/H side
|
Quote:
__________________
My comments are only based on my opinions and vast experience . |
|
The Following User Says Thank You to Clan For This Useful Post: |
Feb 14th, 2015, 20:02 | #6 |
Junior Member
Last Online: Mar 4th, 2024 05:51
Join Date: Jun 2014
Location: chicago
|
this re the codes in the pdm, and the camera is not warming up
PDM-B1B7087 PDM-B1B7086 PDM-B1B7083 PDM-B117C07 upon this code all, the rear right windows rolls up and down by using the DDM or the RDM controller. so can this be the reason why the Blind spot is not working and the message on the DIM displaying blind spot need service |
Feb 14th, 2015, 21:27 | #7 | |
Experienced Member
Last Online: Today 22:51
Join Date: Jun 2007
Location: L/H side
|
Quote:
Getting somewhere now , so this launch thing doesnt tell you what the codes are? Pretty useless :-) The last code indicates a problem with the digital signal to the left rear door controller from the left front door controller The other 3 indicate a problem with the digital signal from the left door module to the left BLIS camera ... This network signal goes from the door module to the BLIS camera AND the rear door module so that is where your fault is , The wire is green with a white stripe ... YOu don't seem aware that there is a BLIS camera in BOTH door mirrors .. when you turn the ignition on and start up the BLIS orange lights should flash about 3 times to show no faults are present . are you going to do some fault tracing or get a new door module and hope for the best?
__________________
My comments are only based on my opinions and vast experience . |
|
The Following User Says Thank You to Clan For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|