|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
No control signal from CEM to tailgate motor (S40/2005)Views : 3593 Replies : 5Users Viewing This Thread : |
|
Thread Tools | Display Modes |
May 17th, 2010, 19:34 | #1 |
New Member
Last Online: May 25th, 2010 17:57
Join Date: May 2010
Location: -
|
No control signal from CEM to tailgate motor (S40/2005)
Hi
My wife have a S40/2005. It's not possible to open tailgate from remote or by tailgate handle. I have tested some components according attachment and they seems to be okay. Any ideas, is it possible to get some information about the CEM by OBDC? Br. Tapsa |
The Following User Says Thank You to ---tapsa--- For This Useful Post: |
May 17th, 2010, 20:46 | #2 |
Premier Member
Last Online: Mar 18th, 2011 13:38
Join Date: May 2009
Location: grassmere!
|
check the wiring through through the rubber bellows in the boot hinge,the wires split.
__________________
|
May 18th, 2010, 19:49 | #3 |
New Member
Last Online: May 25th, 2010 17:57
Join Date: May 2010
Location: -
|
|
May 18th, 2010, 23:12 | #4 |
Premier Member
Last Online: Mar 18th, 2011 13:38
Join Date: May 2009
Location: grassmere!
|
dam,had a couple of cars with the boot not opening and it was this,hard to say what the fault could be without getting a wiring diagram out.
__________________
|
May 24th, 2010, 19:31 | #5 |
New Member
Last Online: May 25th, 2010 17:57
Join Date: May 2010
Location: -
|
Actually it was broken wire
|
The Following User Says Thank You to ---tapsa--- For This Useful Post: |
Oct 26th, 2010, 22:53 | #6 |
New Member
Last Online: Jul 29th, 2021 23:42
Join Date: Jun 2010
Location: Lancs
|
Thanks for posting that wiring diagram. Mine is doing the same. At least now I can try tripping from a 12v wire direct to the motor. I've already tested the switch in the handle and thats fine. Next step motor in the lock assy and the wiring on the hinge.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|