480 Info Centre - Page 2

244T · Jun 7th, 2011, 22:12

I have replaced the bulb, cleaned the contacts on the alternator, checked the fuse and the info centre still does not work. Has anybody any ideas? Or got a spare instrument panel that I could try please? The plugs on the back are green and grey.
Thanks again.

B20F · Jun 8th, 2011, 12:45

The infocentre and radio share the same brown power wire, not oncommon that the wire came loose behind the dash. Can even be that the radio is still working but the ic not because the connection from the ic is behind the one from the radiio. Check the fuses for the radio and info centre #7&21 iirc. And don't forget to pull the mass connector from the battery if you're working on the wiring!

pooley29978 · Jun 11th, 2011, 21:43

I have a 94 440 turbo which has the info centre which went haywire all segments would light up then nothing would light up i traced it down to dry soldered joints with in the cluster which just needed resoldering if u need some advice on a fix give me a bell isle help the best i can PHONE NO 07985512388

Jun 7th, 2011, 22:12	#11
244T VOC Member Last Online: Jan 5th, 2020 18:09 Join Date: Aug 2009 Location: Preston	still does not work I have replaced the bulb, cleaned the contacts on the alternator, checked the fuse and the info centre still does not work. Has anybody any ideas? Or got a spare instrument panel that I could try please? The plugs on the back are green and grey. Thanks again. __________________ Andrew... 244T '90 740 GLT: Standard car '80 240 DL: Lots of bits and bobs inc turbo intercooler etc etc

Jun 8th, 2011, 12:45	#12
B20F Master Member Last Online: Jul 7th, 2016 21:43 Join Date: Mar 2007 Location: Zeist View Photos By: B20F	The infocentre and radio share the same brown power wire, not oncommon that the wire came loose behind the dash. Can even be that the radio is still working but the ic not because the connection from the ic is behind the one from the radiio. Check the fuses for the radio and info centre #7&21 iirc. And don't forget to pull the mass connector from the battery if you're working on the wiring! __________________ Last edited by B20F; Jun 8th, 2011 at 12:47.

Jun 11th, 2011, 21:43	#13
pooley29978 Junior Member Last Online: Jun 12th, 2017 19:58 Join Date: May 2011 Location: newton aycliffe	I have a 94 440 turbo which has the info centre which went haywire all segments would light up then nothing would light up i traced it down to dry soldered joints with in the cluster which just needed resoldering if u need some advice on a fix give me a bell isle help the best i can PHONE NO 07985512388

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)