|
PV, 120 (Amazon), 1800 General Forum for the Volvo PV, 120 and 1800 cars |
Information |
|
rear clunkViews : 1654 Replies : 19Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Mar 21st, 2019, 17:48 | #1 |
Premier Member
Last Online: Yesterday 17:14
Join Date: Jan 2006
Location: Falmouth
|
rear clunk
Hello,
Input here appreciated..I have noticed a clunk from the rear of my Amazon when pulling away at most anything other than a sedate pace (ie most of the time for me). All my suspension bushings are tip top, panhard rod bushings same, car is very well looked after as I drive it every day. So, I thought it was probably the rear U/J, even though they were replaced with uprated ones when I had the prop shortened a few years ago. So, I went under the car to grease the U/J and check things out. When I turned the prop to find the noise, the U/J was fine, (I greased it anyway) but the clonk came from either the diff or the half shafts..I can't tell which..basically the axle somewhere. Any tips on whether that is likely to be a wheel bearing or a diff issue? It seemed to come from both sides, so maybe not a bearing. I have never changed the rear bearings in the 15 years I've had the car however. Rear diff looked after as much as it can be, ie oil changes etc, but I do drive the car hard, so I suppose it could be that. Any tips appreciated, thanks.
__________________
Falmouth, Cornwall. 1970 California white 131. |
Mar 21st, 2019, 19:05 | #2 |
VOC member
Last Online: Apr 26th, 2024 10:03
Join Date: Jan 2008
Location: Sheffield
|
clunk
U/ joints can hide issues when checking them in situ. I would remove the prop then you can pull forward and back as well as checking for rotation issues on all joints. Also check the centre rubber mount and bearing on a 70 model.
My 70 Amazon also has a slight clunk when rocking the diff input flange, though nothing can be heard during road use. i assume this is normal. Also check the rear drums are tight on the tapered half shafts. Go for the simple items first. |
Apr 18th, 2019, 09:45 | #3 |
Master Member
Last Online: Oct 1st, 2023 14:39
Join Date: Dec 2004
Location: leics
|
prop bush
|
Sep 20th, 2019, 13:12 | #4 |
Senior Member
Last Online: Dec 29th, 2022 11:47
Join Date: Jun 2019
Location: Thorndon, near Eye, Suffolk, England
|
Hi Amazon 69, did you get to the bottom of this? I have an intermittent clunk from th rear when pulling away from standstill. I bought my car as a nut and bolt restoration and although not perfect, the underside looks terrific and all bushes look to be brand new.
|
Sep 20th, 2019, 15:49 | #5 |
Premier Member
Last Online: Yesterday 17:14
Join Date: Jan 2006
Location: Falmouth
|
I think it is a U/J. I re-tightened everything all over the car, that helped, I did find a few bolts which were not super tight.
__________________
Falmouth, Cornwall. 1970 California white 131. |
Sep 25th, 2019, 10:25 | #6 |
Senior Member
Last Online: Dec 29th, 2022 11:47
Join Date: Jun 2019
Location: Thorndon, near Eye, Suffolk, England
|
Found a couple of loose nuts. Can anyone describe to me what I should expect from the rubber Centra propshaft mounting? Mine looks in good condition, however it does allow a certain amount of lateral movement, although I don't think this could be the cause of the clunk.
Any guidance very gratefully received! |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|