|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
Clunk when shifting between D N RViews : 433 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Dec 14th, 2015, 12:18 | #1 |
Member
Last Online: Yesterday 16:34
Join Date: Feb 2014
Location: Leatherhead
|
Clunk when shifting between D N R
I think this topic may have been covered multiple times, however I can't seem to find a video showing the problem all just described as a click or clunk...! So here is a video of my click/clunk when shifting between R N D. The nearside driveshaft feels slightly loose, but there do not appear to be any bolts to tighten it.... help!
THanks all. https://www.youtube.com/watch?v=VkRq...ature=youtu.be 2007 V70 2.4D TF80sc auto |
Dec 14th, 2015, 15:05 | #2 | |
I've Been Banned
Last Online: Mar 19th, 2016 19:57
Join Date: Oct 2013
Location: Yondershire
|
Quote:
Driveshafts have one bolt each and its on the outer end behind the centre cap (Wheel Logo), these loosen but usually click rather than clunk, and sometimes even throw up an ABS warning light. If the bolt/s are tight (both sides) then one of more of your CV joints may be worn. Torque setting i can't recall but try 35NM, but they are stretch bolts so may need replaced. Last edited by 4candles; Dec 14th, 2015 at 15:07. |
|
Dec 14th, 2015, 15:37 | #3 |
Member
Last Online: Yesterday 16:34
Join Date: Feb 2014
Location: Leatherhead
|
hey, thanks...i did tighten them maybe 2000 miles ago... maybe ill replace them. I do get an abs/dtsc warning light every now and again, usually if accelerating hard and one of the front wheels slips on a drain lid or something. sometimes even at slow speed manoeuvring.... research continues!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|