coin tray and brace 1800s

ANDREWNT · Dec 20th, 2012, 23:58

Hi i have a 1967 1800s which should have a tray which sits on a metal brace between the front seats. Has anyone got one out of an old car. Probably quite rare if you have one please contact me to discuss price. Also if anyone could send me dimensions of tray I would be most grateful. Thanks

Alf ista · Dec 28th, 2012, 19:43

I have a tray that I fitted in my Amazon. I think it came from and 1800. Is this what you are looking for:

Dont get excited, you cant have it... but I can give you measurements if its the right one.
Hugh

ANDREWNT · Dec 28th, 2012, 22:14

Thanks be great if you could let me have dimensions. It would be interesting to know where you got tray might help me with my search, assume you didn't get brace to go with it? Thanks Again

Alf ista · Dec 29th, 2012, 00:18

No problem. Will measure it up in the morning and give you the sizes. I got it off ebay actually, in two goes. Once I bought a certain item I was looking for, cant remember now what it was, but it came with a bunch of spares that some guy was selling. In the box was a metal support, or brace. After a while I worked out what it was for. Its in the pic, but I painted it black so its a bit hard to see. I then kept an eye on ebay and sure enough, eventually, a tray came up for sale. It was on its own without the brace, so I got it for a good price. Lucky I had the brace, even though at the time I wasnt sure it would fit. It did though and I think it fits in well enough. There is very little storage in an Amazon so it is handy. I think I got it from America. There is a lot of Amazon/1800 stuff for sale on ebay.com so its a good place to look. Good luck with the hunt.

Alf ista · Dec 30th, 2012, 19:50

Andrew, dimensions of tray as follows:
length: 265mm, width: 105mm, height at low end: 40mm, height at high end: 60mm.
Hope that helps.
Hugh

ANDREWNT · Dec 30th, 2012, 23:23

Thanks for the info sorry to be a pest but since you have brace could you let me have dimensions for that too, just when you get chance, as I know it doesn't go round all of tray.
Again appreciate you helping me with this. Cheers

Alf ista · Dec 31st, 2012, 00:05

Hi Andrew. No problem. Should be able to have a look at it tomorrow.

Alf ista · Jan 3rd, 2013, 14:00

Ok, finally got around to it. Here is a pic of the bracket:

Overall length is 175mm. Length of bit that clips on is 135mm and width is 97mm, all outside dimensions. The low part of the tray sits to the front. Hope this helps.

ANDREWNT · Jan 3rd, 2013, 23:43

Great I will keep looking and see if I can find one or someone to make a bracket and tray if not. Thanks very much for taking time to get me have details.

Alf ista · Jan 3rd, 2013, 23:49

No problem Andrew. Best of luck with your search.
Hugh.

Dec 20th, 2012, 23:58	#1
ANDREWNT Member Last Online: Jun 20th, 2023 18:09 Join Date: Nov 2012 Location: Shotley Bridge	coin tray and brace 1800s Hi i have a 1967 1800s which should have a tray which sits on a metal brace between the front seats. Has anyone got one out of an old car. Probably quite rare if you have one please contact me to discuss price. Also if anyone could send me dimensions of tray I would be most grateful. Thanks

Dec 28th, 2012, 19:43	#2
Alf ista Premier Member Last Online: Apr 17th, 2024 12:54 Join Date: Jul 2008 Location: Co. Cork, Ireland.	I have a tray that I fitted in my Amazon. I think it came from and 1800. Is this what you are looking for: Dont get excited, you cant have it... but I can give you measurements if its the right one. Hugh __________________ 1970 Volvo Amazon 131 with a B20A and an M40.

Dec 29th, 2012, 00:18	#4
Alf ista Premier Member Last Online: Apr 17th, 2024 12:54 Join Date: Jul 2008 Location: Co. Cork, Ireland.	No problem. Will measure it up in the morning and give you the sizes. I got it off ebay actually, in two goes. Once I bought a certain item I was looking for, cant remember now what it was, but it came with a bunch of spares that some guy was selling. In the box was a metal support, or brace. After a while I worked out what it was for. Its in the pic, but I painted it black so its a bit hard to see. I then kept an eye on ebay and sure enough, eventually, a tray came up for sale. It was on its own without the brace, so I got it for a good price. Lucky I had the brace, even though at the time I wasnt sure it would fit. It did though and I think it fits in well enough. There is very little storage in an Amazon so it is handy. I think I got it from America. There is a lot of Amazon/1800 stuff for sale on ebay.com so its a good place to look. Good luck with the hunt. __________________ 1970 Volvo Amazon 131 with a B20A and an M40.

Dec 30th, 2012, 19:50	#5
Alf ista Premier Member Last Online: Apr 17th, 2024 12:54 Join Date: Jul 2008 Location: Co. Cork, Ireland.	Andrew, dimensions of tray as follows: length: 265mm, width: 105mm, height at low end: 40mm, height at high end: 60mm. Hope that helps. Hugh __________________ 1970 Volvo Amazon 131 with a B20A and an M40.

Dec 30th, 2012, 23:23	#6
ANDREWNT Member Last Online: Jun 20th, 2023 18:09 Join Date: Nov 2012 Location: Shotley Bridge	Thanks Thanks for the info sorry to be a pest but since you have brace could you let me have dimensions for that too, just when you get chance, as I know it doesn't go round all of tray. Again appreciate you helping me with this. Cheers

Dec 28th, 2012, 22:14	#3
ANDREWNT Member Last Online: Jun 20th, 2023 18:09 Join Date: Nov 2012 Location: Shotley Bridge	Thanks be great if you could let me have dimensions. It would be interesting to know where you got tray might help me with my search, assume you didn't get brace to go with it? Thanks Again

Dec 31st, 2012, 00:05	#7
Alf ista Premier Member Last Online: Apr 17th, 2024 12:54 Join Date: Jul 2008 Location: Co. Cork, Ireland.	Hi Andrew. No problem. Should be able to have a look at it tomorrow. __________________ 1970 Volvo Amazon 131 with a B20A and an M40.

Jan 3rd, 2013, 14:00	#8
Alf ista Premier Member Last Online: Apr 17th, 2024 12:54 Join Date: Jul 2008 Location: Co. Cork, Ireland.	Ok, finally got around to it. Here is a pic of the bracket: Overall length is 175mm. Length of bit that clips on is 135mm and width is 97mm, all outside dimensions. The low part of the tray sits to the front. Hope this helps. __________________ 1970 Volvo Amazon 131 with a B20A and an M40.

Jan 3rd, 2013, 23:43	#9
ANDREWNT Member Last Online: Jun 20th, 2023 18:09 Join Date: Nov 2012 Location: Shotley Bridge	Great I will keep looking and see if I can find one or someone to make a bracket and tray if not. Thanks very much for taking time to get me have details.

Jan 3rd, 2013, 23:49	#10
Alf ista Premier Member Last Online: Apr 17th, 2024 12:54 Join Date: Jul 2008 Location: Co. Cork, Ireland.	No problem Andrew. Best of luck with your search. Hugh. __________________ 1970 Volvo Amazon 131 with a B20A and an M40.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)