pv544 windscreen rear quarterlights

4 potter · Mar 18th, 2011, 20:55

hi just bought pv but unfortunately screen broke and rear quarterlights missing if not secondhand any suppliers for these items any help appreciated also headlining interior

also front suspension rubbers brakes etc

davidw6092 · Mar 21st, 2011, 06:59

Hi there,I am pretty certain that I have some quarterlights for a pv in my workshop.I will be up there next weekend and will check.What suspension rubbers and stuff are you looking for exactly,as I still have quite a lot of pv stuff around?Dave

4 potter · Mar 21st, 2011, 18:59

hi dave all the front rubbers on the axle are us and perished with what i can see all sorts of bits and bobs ie how does bonnet fit is there special bolts etc i think my rear quarterlights were opening also is there a trim that goes up the inner windscreen posts so as you can see quite a variety of parts needed

if you have anything i could use would be very grateful

davidw6092 · Mar 21st, 2011, 20:50

The front wishbone bushes are the same as amazon top wishbone inner bushes.Easy to change and they just look like rubber cotton reels.B16 and B18 bonnets are different,hinges and stays are different.Ther should be rubber buffers on the bonnet lower edge where it sits on the wings.Not sure if you mean on inside or outside of screen for trims.Give me a bell or text on 07941 342185 if you need any other stuff.Cheers dave

davidw6092 · Apr 5th, 2011, 06:38

I have the rear quarterlight glass and the seals ,but no frames.I think I used the original frames on the car when we went to plastic quarterlights in a weight reducing scheme.(rally car ).Dave

Mar 18th, 2011, 20:55	#1
4 potter New Member Last Online: Apr 26th, 2011 21:29 Join Date: Mar 2011 Location: s****horpe	pv544 windscreen rear quarterlights hi just bought pv but unfortunately screen broke and rear quarterlights missing if not secondhand any suppliers for these items any help appreciated also headlining interior also front suspension rubbers brakes etc Last edited by 4 potter; Mar 18th, 2011 at 20:56. Reason: extra parts required

Mar 21st, 2011, 06:59	#2
davidw6092 Senior Member Last Online: Oct 4th, 2023 06:43 Join Date: Dec 2008 Location: Banbury	PV quarterlights Hi there,I am pretty certain that I have some quarterlights for a pv in my workshop.I will be up there next weekend and will check.What suspension rubbers and stuff are you looking for exactly,as I still have quite a lot of pv stuff around?Dave

Mar 21st, 2011, 18:59	#3
4 potter New Member Last Online: Apr 26th, 2011 21:29 Join Date: Mar 2011 Location: s****horpe	hi dave all the front rubbers on the axle are us and perished with what i can see all sorts of bits and bobs ie how does bonnet fit is there special bolts etc i think my rear quarterlights were opening also is there a trim that goes up the inner windscreen posts so as you can see quite a variety of parts neededif you have anything i could use would be very grateful

Mar 21st, 2011, 20:50	#4
davidw6092 Senior Member Last Online: Oct 4th, 2023 06:43 Join Date: Dec 2008 Location: Banbury	pv bits The front wishbone bushes are the same as amazon top wishbone inner bushes.Easy to change and they just look like rubber cotton reels.B16 and B18 bonnets are different,hinges and stays are different.Ther should be rubber buffers on the bonnet lower edge where it sits on the wings.Not sure if you mean on inside or outside of screen for trims.Give me a bell or text on 07941 342185 if you need any other stuff.Cheers dave

Apr 5th, 2011, 06:38	#5
davidw6092 Senior Member Last Online: Oct 4th, 2023 06:43 Join Date: Dec 2008 Location: Banbury	PV quarterlights I have the rear quarterlight glass and the seals ,but no frames.I think I used the original frames on the car when we went to plastic quarterlights in a weight reducing scheme.(rally car ).Dave

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)