|
General Volvo and Motoring Discussions This forum is for messages of a general nature about Volvos that are not covered by other forums and other motoring related matters of interest. Users will need to register to post/reply. |
Information |
|
locking wheel nutsViews : 1434 Replies : 6Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Oct 28th, 2002, 10:54 | #1 |
Bostin !!!
Last Online: Aug 22nd, 2019 19:07
Join Date: Dec 2001
Location: Monkhopton
|
locking wheel nuts
mornin chaps
just a quickie what locking wheel nuts do you use ??? i currently have the volvo ones but went to take the front wheel off and the "key" seemed to kick off the nut and now i cant get the thing off. It will come off no doubt but i cant hold the key on hard enough to prevent it sliding out/off. visit to the tyre dealer should sort this. but my concern is, has this happened to anyone else, or is this just me being 'blonde' again. oh, the car has just been serviced an all the nuts seemed to be over the 110NM quoted in the manual. as always, thanks for your time/effort scott and a new set £17.95 from eurocarparts, add that to the £30.00 for the torque wrench, x( |
Oct 28th, 2002, 17:06 | #2 |
Bostin !!!
Last Online: Aug 22nd, 2019 19:07
Join Date: Dec 2001
Location: Monkhopton
|
RE: locking wheel nuts
argh
come on guys, i'm not the only one with locking wheel nuts surely !! |
Oct 28th, 2002, 20:21 | #3 |
VOC Member
Last Online: Aug 12th, 2015 14:44
Join Date: Dec 2001
Location: sunderland
|
RE: locking wheel nuts
george you are not alone,i have the same problem with the volvo locking nuts. i think its due to the keyway being serated and if you do not get the key in line it damages the seration for future use,a bad design i think.
paul [4 forty] |
Oct 28th, 2002, 20:41 | #4 |
Guest
Location:
|
RE: locking wheel nuts
I had these on my first Volvo, a 1981 244GLE. I needed to change a wheel one day and the key broke. I had to chisel the nut off. I have them on my 850 but I don't put them on tightly, and I won't let a garage put them on, that's probably why the key broke on my last Volvo. As Paul says, bad design.
Bob |
Oct 29th, 2002, 09:15 | #5 |
Bostin !!!
Last Online: Aug 22nd, 2019 19:07
Join Date: Dec 2001
Location: Monkhopton
|
RE: locking wheel nuts
cheers guys
so are there any alternatives that you would recommend ?? and put on to tightly, this could be the reason, i set the torque to 110NM as the book states and noted that all the nuts were a LOT tighter !!! anyway, thanks scott |
Oct 29th, 2002, 10:07 | #6 |
Guest
Location:
|
RE: locking wheel nuts
Try ScrewFix Direct for a torque wrench, they've got them for about £12.
Adam '94 850 T5 |
Oct 29th, 2002, 10:10 | #7 |
Bostin !!!
Last Online: Aug 22nd, 2019 19:07
Join Date: Dec 2001
Location: Monkhopton
|
RE: locking wheel nuts
adam
cheers mate, just what i needed to hear, already paid 30 quid for it !! ar$e x( scott |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|