|
850 / S70 & V70 '96-'99 / C70 '97-'05 General Forum for the 850 and P80-platform 70-series models |
Information |
|
WipersViews : 588 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Mar 4th, 2006, 18:43 | #1 |
Trader
|
Wipers
Hi all,
This only started to hapen the other day. When i went to use the wipers on my 850 T5, they did not compleate their cycle. As soon as i tap the windscreen wiper stalk for a single sweep, they are supposed to compleate a1 cycle. Insted they stop as soon as i realse the wiper stalk. They work okay aslong as you either put them into one of the modes, like intermittant or fully on, but as soon as you put the leaver to stop, if they have not finished their cycle, the wipers will just stop dead. What could be causing this |
Mar 4th, 2006, 19:10 | #2 |
You Can't Beat A Swede
|
It could be a number of things. The motor, the stalk or even the relay. I have known each one of these things to cause this fault. Although on different vehicles. I'm sure someone hear would have had this fault and would know the most likley cause.
__________________
1993 850 2.0 20v SE Auto, 1996 850 T-5 CD Auto 1998 V70 R Manual, 2001 S80 D5 SE manual 2007 S80 V8 AWD Auto 2017 V40 T-3 Inscription Auto |
Mar 5th, 2006, 07:57 | #3 |
Trader
|
Wipers
Cheers ste-mal. I will wait and see if any other members bring up any ideas to help me out.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|