Problems with Fitting a 13 Pin wiring loom

BRE77M · Jul 16th, 2010, 18:33

Hi
I have installed a volvo 13 pin wiring loom for my xc90 but have a problem when connecting it to the control module
I can connect the black connector to the fuse board ok but the control module does not have any more spaces to connect the green and grey connectors to it
and the fuse board has all ready fuses in the spaces require to make it work
the car has the rear dvd system installed is this causing the problem
Is it a trip to the dealer?
Thanks in advance of any replys

Clan · Jul 16th, 2010, 19:34

It sounds as if you don't have the trailer module , the green and grey plugs fit into that . then you get the dealer to download the appropriate software ...

Jul 16th, 2010, 18:33	#1
BRE77M New Member Last Online: Jul 16th, 2010 19:10 Join Date: Jun 2010 Location: northampton	Problems with Fitting a 13 Pin wiring loom Hi I have installed a volvo 13 pin wiring loom for my xc90 but have a problem when connecting it to the control module I can connect the black connector to the fuse board ok but the control module does not have any more spaces to connect the green and grey connectors to it and the fuse board has all ready fuses in the spaces require to make it work the car has the rear dvd system installed is this causing the problem Is it a trip to the dealer? Thanks in advance of any replys

Jul 16th, 2010, 19:34	#2
Clan Experienced Member Last Online: Jun 15th, 2024 16:06 Join Date: Jun 2007 Location: L/H side	It sounds as if you don't have the trailer module , the green and grey plugs fit into that . then you get the dealer to download the appropriate software ... __________________ My comments are only based on my opinions and vast experience .

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)