|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
Volvo BT Phone P2v2 - Phone Module (PHM) Bluetooth updateViews : 87284 Replies : 411Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Apr 21st, 2018, 16:42 | #121 |
Junior Member
Last Online: Feb 12th, 2024 00:43
Join Date: Feb 2011
Location: UK
|
Thanks to Marek for continuing to develop this.
|
The Following User Says Thank You to dgmacc For This Useful Post: |
Apr 22nd, 2018, 19:49 | #122 | ||
Junior Member
|
Quote:
Quote:
|
||
Apr 24th, 2018, 23:30 | #123 |
Senior Member
Last Online: Mar 3rd, 2024 09:28
Join Date: Dec 2016
Location: Frenstat p.R.
|
some bug fixes. and one now feature .
v2018-04-25_1 News - Bluetooth: Added a feature to swap connected cellphones. If you dial "**#" then the cellphone for calls is changed to cellphone for the music and vice versa. Updated - Bluetooth: Some names of configuration files has been changed (again). The reason is due to merge the names for all my BT products: - - Bluetooth module name: “bt_name.bst” - - User texts: “bt_user_texts.bst” Fixed - Bluetooth: The second cellphone autoconnection. - Modem: The Bootloader version didn’t change after the update (it was right after the reboot). - Modem: History calls readout.
__________________
Current: Volvo S60 T5, 2002, Bluetooth PHM .:::. Volvo S80 V8, MY2008, Bluetooth PHM |
The Following 2 Users Say Thank You to marekbm For This Useful Post: |
Apr 25th, 2018, 20:23 | #124 |
Junior Member
|
I have installed this new version, and the update went fine. Both the bootloader and the firmware version now show the new versions.
I also connected both my phones (iPhone 7 and Galaxy S9+) at the same time, and the first time I switched using **# it switched as expected. I saw in the DIM display the new phone name. But the second time, switching back, even though the phones switched, the DIM display kept displaying the first phone name, while the second one was active (I verified by making a call). Restarting the PHM (by turning off ignition for a few seconds) did not help. I will check tomorrow by using a third phone if incoming calls can be switched correctly. By the way: is it normal behavior that "factory reset" does not clear ALL settings? For example the bluetooth device list is not cleared. Is that intentional? |
Apr 26th, 2018, 20:30 | #125 |
Junior Member
|
I think that switching feature needs a bit more testing and development :-)
Today while testing the phone module froze a few times completely (requiring the car to turn off ignition to recover), and when incoming calls were ringing I was unable to pick up the phone. Also, even while connected, outgoing calls were not using the PHM for audio. I think I will downgrade to the previous version for now... If you need to have me test anything, let me know. |
May 2nd, 2018, 18:51 | #126 | |
Senior Member
Last Online: Mar 3rd, 2024 09:28
Join Date: Dec 2016
Location: Frenstat p.R.
|
Quote:
__________________
Current: Volvo S60 T5, 2002, Bluetooth PHM .:::. Volvo S80 V8, MY2008, Bluetooth PHM |
|
May 7th, 2018, 20:40 | #127 |
Senior Member
Last Online: Mar 3rd, 2024 09:28
Join Date: Dec 2016
Location: Frenstat p.R.
|
the part managing calls has been changed quite a lot.
now it works like this: incoming calls (does not matter if the first or the second connected device): - if the call is rejected, then it's terminated - if accepted on then PHM (if it offers it) then the call is connected as a HF via PHM - if accepted on then device then the call stays on device outgoing call: - if dialled on the PHM then the call is created on the first connected device (possible to switch via "**#") - if dialled on the device then: - - if not active any call then it's connected as a HF via PHM (if ericsson modem or the it's the second device then PHM starts ringing, if rejected then call stays in the device) - - if already active call (connected as a HF) then the new call stays in the device call terminating: - if the red button on the PHM (or the steering wheel) is pressed then the call connected as a HF is terminated. - if terminated on the device then it's also terminated on the PHM (if connected) call switching between PHM and the device: - if you want to switch the call from the PHM to the device then select Earphone or Speaker on the device (audio options during the call). the call will stay in the device and it's terminated in PHM. - if you want to switch the call from the device to the PHM (HF) then select Bluetooth on the device (audio options during the call). if ericsson modem or the it's the second device then PHM starts ringing, if rejected then call stays in the device 2 active calls or 1 active and 1 incomming: - if 2 active calls (each on the different device) and the call connected with the PHM is terminated as the first then the PHM offer the connection with the second. if ericsson modem or the it's the second device then PHM starts ringing, if rejected then call stays in the device - if call is active and connected with PHM and some incomming call is on the second device then: - if accept the call on the device then call stays in the device. - if current active call is terminated then the PHM offers accept / reject the of the incomming call. in the shortcut: where you do the action, there it will affect. not so possitive news for the iPhone owners. i have an piece for the testing. after some tests i do not recommend it to use with another connected device (the connection start to be unstable, from time to time it causes Bluetooth modem restarts, ...). the worst scenario is if the iPhone is connected as the second device and you make a call or somebody calls to the device. if iPhone is connected as an only device then there is no problems. i hope that this text makes a sence. if not then i apologize and let me know. --------------------------------------- v2018-05-06_1 News - Bluetooth: Now it’s possoble to connect call from the second device with HF. - Bluetooth: If current call is terminated and another call on then second connected device is active then the PHM will offer to connect with HF. Fixed - Bluetooth: If call on the second connected device starts then module is unstable. - Bluetooth: Call management rewrited.
__________________
Current: Volvo S60 T5, 2002, Bluetooth PHM .:::. Volvo S80 V8, MY2008, Bluetooth PHM |
May 8th, 2018, 22:06 | #128 |
New Member
Last Online: Sep 16th, 2021 15:48
Join Date: May 2018
Location: Stockholm
|
I'm a bit confused about the setting file received when I send the command bt_config.bgt. The file look like this:
# device configuration english hfp+a2dp cd-c2 auto 0000 4 6 on on I compare it to the bt_config.bst file that look like this: #1 - language: ("cestina" / "english") english #2 - Bluetooth mode: ("hfp+a2dp" / "a2dp" / "hfp") hfp+a2dp #3 - radio mode: ("cd-c" / "cd-c2" / "md-c" / "md-c_1x" / "md-c_2x" / "md-c_3x" / "sat") cd-c #4 - pairing: ("auto" / "approve") auto #5 - PIN for obsolete devices 0000 #6 - microphone gain: (1 - 5) 3 #7 - speaker gain: (1 - 5) 1 #8 - read contacts from the cellphone: ("on" / "off") on #9 - voice command activation via radio: ("on" / "off") off Is my Mic gain set to 6 ??! And the valid values is 1 - 5. I have tried to set the Mic gain to 2 in the setting menu on the PHM before download the setting file. It would be easier if the setting menus was reflecting the current setting like this: A: Mic. 1 A: Mic. 2* A: Mic. 3 ... Which would mean that the Mic-gain is set to "2". |
May 9th, 2018, 20:51 | #129 |
Senior Member
Last Online: Mar 3rd, 2024 09:28
Join Date: Dec 2016
Location: Frenstat p.R.
|
sorry, missing update in the settings file. the last version of firmware can has 1-6 as an option for speaker and mic settings.
edit: and the values for 1-6 are also different than before. for microphone: 1-3 is recommended if you use mostly the iphone because if you use the higher value then it can cause strange noise on the second side.
__________________
Current: Volvo S60 T5, 2002, Bluetooth PHM .:::. Volvo S80 V8, MY2008, Bluetooth PHM Last edited by marekbm; May 9th, 2018 at 20:55. |
May 9th, 2018, 22:04 | #130 |
Junior Member
|
I will test the latest software tomorrow, and will let you know my findings.
Do you think the 2nd iPhone issues is something you can fix? |
Tags |
bluetooth handsfree radio |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|