|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
Driver's door not flushViews : 409 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Aug 31st, 2018, 18:47 | #1 |
Junior Member
Last Online: Apr 17th, 2024 21:16
Join Date: Aug 2018
Location: Manchester
|
Driver's door not flush
When I shut my driver's door it doesn't sit flush against the body of the car, but the passenger one does.
Is this something that happens over time with use and can it be fixed? |
Aug 31st, 2018, 18:58 | #2 |
FCW Auto Service
Last Online: Yesterday 23:31
Join Date: Feb 2015
Location: Gloucester
|
I had this on a Toyota Yaris.
One screw on the door latch was loose. Tightened it up and it went flush again. Not sure if this affects Volvos though. |
Aug 31st, 2018, 22:31 | #3 |
Junior Member
Last Online: Apr 17th, 2024 21:16
Join Date: Aug 2018
Location: Manchester
|
I'll check that mate cheers. I looked at it earlier but didn't physically check it to see.
I don't think it's the hinges or anything as I have tried lifting the door up when it's open to see if the top one is loose but it doesn't budge. It mainly affects the top half of the door as the window and seal doesn't sit fully in the rebate. I'll grab some pictorial evidence in the morning. |
Sep 1st, 2018, 09:54 | #4 |
Junior Member
Last Online: Feb 8th, 2023 21:32
Join Date: Aug 2018
Location: Tamworth
|
If it seems tight, look around the catch plate to see if there is a dirty/clean area as it may have moved a bit but still be too tight to move by hand.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|