|
S60 & V60 '11-'18 / XC60 '09-'17 General Forum for the P3-platform 60-series models |
Information |
|
Winter is coming....a wheel threadViews : 447 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 18th, 2017, 09:48 | #1 |
Senior Member
Last Online: Apr 18th, 2024 11:47
Join Date: Mar 2015
Location: Belfast and London
|
Winter is coming....a wheel thread
So its time to put on my winter wheels, I had thought about using a lubricant for the wheel nuts, but after some research maybe not.
https://www.youtube.com/watch?v=X3ndeXiZUeM Worth a watch on the damage you can do with the wrong torque.
__________________
XC60 MY10 AWD D5 Summum 205 PS, Geartronic, Winter pack, Aux diesel heater, Xenons, Family pack, Tinted rears, Moonroof, Parking sensor F&R, Premium sound, Car phone, Reversing camera, Lane departure, Hill decent, Savile Grey. |
The Following 2 Users Say Thank You to Fat Magpie For This Useful Post: |
Nov 18th, 2017, 18:14 | #2 |
Master Member
Last Online: Yesterday 08:52
Join Date: Feb 2012
Location: Aberdeen
|
Absolutely!
Unless something is specified, nuts should be torqued with dry threads. I always use brake cleaner to clean threads before re-installing Now, how about no copper grease anywhere near brakes ... |
Nov 18th, 2017, 18:38 | #3 |
Premier Member
Last Online: Feb 29th, 2024 15:46
Join Date: Jul 2009
Location: Barnard Castle
|
There is, however, something to be said for applying a little grease to the wheels before re-fitting. I have had two instances where it was impossible to remove a (flat tyre) wheel because the alloys had become stuck. The RAC had to be called. A crow bar and a strong kick finally freed the wheel.
__________________
2015: XC60 D4 FWD SE Lux Nav 190hp manual, Osmium Grey, 17" Segin, Tempa, Winter Illumination, Security, Family, DSP, 4C, HK Sound, Subwoofer, Front Parking, Rear Camera, Dark Tinted, Power Passenger Seat, Speed and Heated Steering. |
Nov 18th, 2017, 19:28 | #4 |
Master Member
Last Online: Mar 11th, 2022 08:02
Join Date: Feb 2015
Location: Global Village
|
A sparing a month of copper anti seize and a standard ratchet or wheel wrench and you will not get anywhere near enough torque to damage a wheel stud or a crack a wheel.
Just dont use both legs of a spider or an extended wrench/ breaker bar, thats for taking wheels off. The only car Ive had with snapped studs was one without anti-seize, but had been to the tyre shop 5 times, they damaged them by applying too much torque to remove them. The mating face of the wheel and disc centre hub is also a great place for a thin coat as well, as alloys get corroded onto the iron.
__________________
2018 V90 Momentum Pro Last edited by Chief inspector; Nov 18th, 2017 at 20:08. |
The Following 2 Users Say Thank You to Chief inspector For This Useful Post: |
Nov 18th, 2017, 19:59 | #5 |
Premier Member
Last Online: Feb 4th, 2023 15:10
Join Date: Apr 2015
Location: uk
|
very interesting wont use this again oops
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|