D5 (2005 on) System Service Light but No Check Engine

[taylope1]

Originally Posted by arcascomp

Darn it, foiled by the image link stuff! I did an image search on Google for volvo dip stick and there is an image on there from the SwedeSpeed forums. https://www.swedespeed.com/threads/o...o-read.638787/

Thanks. I think it's not a million miles off that pic. So might be oil , might be swirl arm. I do all 2 mile school trips and little else so maybe I'll take it for a long drive and see if anything changes

[Clan]

Originally Posted by taylope1

Engine System Service Required along with the Orange "i" (info) light. I press the messages button on the end of the stick and the "i" goes (and the message) although it will reappear if i cycle through the messages again.

there has to be a code with that message ..

[taylope1]

So I am left with 1 option - Main Dealer and VIDA/DICE ??

[Familyman 90]

I'll have a shilling on an emcon code relating to the flaps.

[arcascomp]

Been a while since I've been online here, so my memory is shot, do we have some sort of members map available, especially those with a Dice/Vida set up prepared to help a fellow out? I always wince for those that have to go and pay a Volvo dealer to get the codes read, some are pretty reasonable, but others sound like a costly nightmare!

If you were closer I'd happily run your car on mine. I do occasionally visit family close to Sussex, but not due down there for months yet.

[taylope1]

Update : So i updated the s/w on my i906, still no codes using auto detection mode. Went into manual mode and 3 codes appears under Engine (i think). 2 were from the sensors that we changed and 1 was A/C not working. Cleared coded, message gone.

No clue if it will last but for now the message is no longer popping up.

[Clan]

Originally Posted by taylope1

Update : So i updated the s/w on my i906, still no codes using auto detection mode. Went into manual mode and 3 codes appears under Engine (i think). 2 were from the sensors that we changed and 1 was A/C not working. Cleared coded, message gone.

No clue if it will last but for now the message is no longer popping up.

I found auto detection doesn't work with volvos on iCarsoft models . I cant see how it would work to be honest with dozens of modules to interrogate .

[Familyman 90]

It works fine on the V2.0 and V3.0 although its a little slow as the box churns through all the systems. I'm not sure the i906 does it at all.

[Clan]

Originally Posted by Familyman 90

It works fine on the V2.0 and V3.0 although its a little slow as the box churns through all the systems. I'm not sure the i906 does it at all.

I found Auto detect was hit and miss on the icarsoft V2.0