|
850 / S70 & V70 '96-'99 / C70 '97-'05 General Forum for the 850 and P80-platform 70-series models |
Information |
|
Wiper arms stripped taper splinesViews : 918 Replies : 7Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Dec 6th, 2010, 18:42 | #1 |
Junior Member
Last Online: May 9th, 2024 11:29
Join Date: Aug 2009
Location: Coventry
|
Wiper arms stripped taper splines
Having ensured that the wipers were free today ...10 mins later -7 here...the taper stripped in the arm, having enquired about a new arm, I removed the arm cleaned both the splines and filed the step out of the arm and replaced the nut. OK the question is, does a new arm come with the hole splined (as such a female of the male pinion) or not. Adrian@
|
Dec 6th, 2010, 19:20 | #2 |
VOC Member
Last Online: Apr 22nd, 2024 20:55
Join Date: Jun 2006
Location: Yorkshire
|
Adrian,
The new arm should come with the "hole" splined. I had a similar problem and managed to prevent the cost of a new arm by doing as you said in cleaning both halves and "Loctite"ing them together before fitting the compression nut on to the thread. Cheers |
Dec 6th, 2010, 19:31 | #3 |
Volvologist
Last Online: Dec 6th, 2023 11:13
Join Date: Aug 2008
Location: Bangor - Norn Iron
|
Just what you've done should cure the problem, its alloy arm, so the splines will dig in again when you tightened the nut
__________________
What's the matter with the car I'm driving? Can't you tell that it's out of style? Should I get a set of white wall tires? Are you gonna cruise the miracle mile? |
Dec 6th, 2010, 19:49 | #4 |
ba baracus...
Last Online: May 30th, 2023 12:30
Join Date: Dec 2008
Location: chichester west sussex
|
which bit do you need i have all off it and im in brum in the morning......
__________________
i aint getting on no plane............. |
Dec 15th, 2010, 15:16 | #5 |
VOC Member
Last Online: May 26th, 2024 15:41
Join Date: Dec 2004
Location: Ruislip
|
Stripped wiper spline.
Hi Chaps,
Not sure if this will help, but my old 850 stripped a thread on the drivers side. Drilled it and put a split pin in it without dismantling anything. All still OK two years later. |
Dec 15th, 2010, 16:09 | #6 |
Senior Member
Last Online: Sep 6th, 2023 17:01
Join Date: Feb 2010
Location: Edinburgh
|
|
Dec 16th, 2010, 20:48 | #7 |
Junior Member
Last Online: May 9th, 2024 11:29
Join Date: Aug 2009
Location: Coventry
|
I have been offline without a computer....having sorted this as I descibed, I need to get a good pair as a backup. Adrian@
|
Dec 17th, 2010, 15:15 | #8 |
ba baracus...
Last Online: May 30th, 2023 12:30
Join Date: Dec 2008
Location: chichester west sussex
|
have got wiper arms and motor if you get stuck.......
__________________
i aint getting on no plane............. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|