Breaking 480 Es 1993 2 ltr - Page 3

ourwillie · Apr 3rd, 2012, 17:24

Jim can you hold it for me and I will remove the old one tonight and let you know tomorrow please?
Thanks

glasgowjim · Apr 3rd, 2012, 21:39

ok will do

regards jim.

ourwillie · Apr 4th, 2012, 08:47

Thanks Jim as you may have read on the other post I tried last night without success I will be at it today again and let you know asap.

glasgowjim · Apr 4th, 2012, 10:16

dont worry about breaking the handle as I will throw in a replacement handle free of charge for you.

will even do that if you dont need a cem as well just cover the postage.

ourwillie · Apr 4th, 2012, 20:19

Was at the car today and the handle came off ok I have two of the loom plugs removed but the third is proving to be a bit of an obstacle thats the akward placed one of course the one next the door frame! typical. So left it tonight with the intentions of removing the two torques screws at the end of the dash see if it makes it any easier to get at. I assume Jim that the one you have will fit this 480 es auto 1994?

glasgowjim · Apr 4th, 2012, 23:26

removing the 2 torx screws at the side of the dash the ones covered by the little plastic plate will make no difference to removing the connector you are just going to give yourself a lot of extra work and grief. I have removed several of these cems you just have to be patient and fiddle away at it.

ourwillie · Apr 5th, 2012, 08:31

Ok thanks Jim do the clips at the side of the plug squeeze in or what before release from the pins? What an akward place to put something? especially with those looms squeezed in there!

ourwillie · Apr 5th, 2012, 14:03

Well Jim finally have the cem removed found the other screw behind another pile of wires what an after thought this seems to have been! Anyway I take it these items are not coded to a particular car? So the one I have off is a cem 111 pt no 50k 004 696 10 is yours the same ? if so let me know please asap and will get you sorted please.

glasgowjim · Apr 7th, 2012, 23:35

all cem 3's are the same , will post out on ondays mail first class .

thanks jim.

Apr 3rd, 2012, 17:24	#21
ourwillie Junior Member Last Online: May 6th, 2012 23:15 Join Date: Mar 2012 Location: Londonderry	Jim can you hold it for me and I will remove the old one tonight and let you know tomorrow please? Thanks

Apr 3rd, 2012, 21:39	#22
glasgowjim Senior Member Last Online: Apr 17th, 2018 15:45 Join Date: Aug 2008 Location: glasgow	ok will do regards jim.

Apr 4th, 2012, 08:47	#23
ourwillie Junior Member Last Online: May 6th, 2012 23:15 Join Date: Mar 2012 Location: Londonderry	Thanks Jim as you may have read on the other post I tried last night without success I will be at it today again and let you know asap.

Apr 4th, 2012, 10:16	#24
glasgowjim Senior Member Last Online: Apr 17th, 2018 15:45 Join Date: Aug 2008 Location: glasgow	dont worry about breaking the handle as I will throw in a replacement handle free of charge for you. will even do that if you dont need a cem as well just cover the postage.

Apr 4th, 2012, 20:19	#25
ourwillie Junior Member Last Online: May 6th, 2012 23:15 Join Date: Mar 2012 Location: Londonderry	Was at the car today and the handle came off ok I have two of the loom plugs removed but the third is proving to be a bit of an obstacle thats the akward placed one of course the one next the door frame! typical. So left it tonight with the intentions of removing the two torques screws at the end of the dash see if it makes it any easier to get at. I assume Jim that the one you have will fit this 480 es auto 1994?

Apr 4th, 2012, 23:26	#26
glasgowjim Senior Member Last Online: Apr 17th, 2018 15:45 Join Date: Aug 2008 Location: glasgow	removing the 2 torx screws at the side of the dash the ones covered by the little plastic plate will make no difference to removing the connector you are just going to give yourself a lot of extra work and grief. I have removed several of these cems you just have to be patient and fiddle away at it.

Apr 5th, 2012, 08:31	#27
ourwillie Junior Member Last Online: May 6th, 2012 23:15 Join Date: Mar 2012 Location: Londonderry	Ok thanks Jim do the clips at the side of the plug squeeze in or what before release from the pins? What an akward place to put something? especially with those looms squeezed in there!

Apr 5th, 2012, 14:03	#28
ourwillie Junior Member Last Online: May 6th, 2012 23:15 Join Date: Mar 2012 Location: Londonderry	Well Jim finally have the cem removed found the other screw behind another pile of wires what an after thought this seems to have been! Anyway I take it these items are not coded to a particular car? So the one I have off is a cem 111 pt no 50k 004 696 10 is yours the same ? if so let me know please asap and will get you sorted please.

Apr 7th, 2012, 23:35	#29
glasgowjim Senior Member Last Online: Apr 17th, 2018 15:45 Join Date: Aug 2008 Location: glasgow	all cem 3's are the same , will post out on ondays mail first class . thanks jim.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)