V50 rear spoiler fitting template. - Page 3

VX280 · Nov 27th, 2018, 14:29

So I've eventually found a V50 Rear spoiler template with some dimensions written on, see attached. However before I start cutting holes

I'd like to make sure the dimensions are correct. Can anyone help please or does anyone have another set of templates to compare against? Thanks

IainG · Nov 28th, 2018, 06:05

Hi
Can't you just check the template against your spoiler and see if the holes line up first.
Then draw around the feet of the spoiler on to your template with the holes lining up with the template holes. You can then tape the templates to the car, using those measurements then put spoiler in place and check it lines up with the feet marks?
As you are using tape the templates can be adjusted easily.

Iain

tdz840 · Oct 31st, 2020, 09:39

Quote:

Originally Posted by askim98

hi guys
i have attched the templates

the only thing that you have to make sure is that they are printed to scale as i have realised that when i printed them to test came out littlebit smaller.

use an old printer should be ok.

askim98

This is an old post I know but was hoping someone may have the two fitting templates for the V50 tailgate spoiler
TIA
Russ

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Nov 28th, 2018, 06:05	#22
IainG Premier Member Last Online: Yesterday 16:16 Join Date: Apr 2013 Location: Plymouth	Hi Can't you just check the template against your spoiler and see if the holes line up first. Then draw around the feet of the spoiler on to your template with the holes lining up with the template holes. You can then tape the templates to the car, using those measurements then put spoiler in place and check it lines up with the feet marks? As you are using tape the templates can be adjusted easily. Iain

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)