|
700/900 Series General Forum for the Volvo 740, 760, 780, 940, 960 & S/V90 cars |
Information |
|
Cannot start my Volvo 940 2.3 EstateViews : 2934 Replies : 36Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Mar 9th, 2018, 15:10 | #1 |
New Member
Last Online: Jul 9th, 2018 18:51
Join Date: Mar 2018
Location: Scunthorpe
|
Cannot start my Volvo 940 2.3 Estate
Hello everyone. First time poster here. I have a problem with my Volvo and I'm hoping someone out there can offer some help. I've owned the car since 2006, on a 'N' reg and up to present, it has been incredibly reliable - but about 3 weeks ago, I started the car, it fired no problem, first time but I did notice a ticking noise from the engine. I thought 'I'll have to get the garage to look at that'. Off I went, all was well 'til I reached the first set of traffic lights. The car stalled. Never had that before - it's an automatic. I turned the engine over to restart it and I heard a high pitched whine rather than the expected turn-over noise. I thought the timing belt had snapped. As I was still in the village where I live, I 'phoned the local garage who services the car, they came straight out to me and they agreed that it did sound like the timing belt, though they didn't try to turn it over. They then towed it back to their workshop.
Now, they find themselves a bit stumped as to what's wrong. They tell me the timing belt is in tact, the timing is spot on, the engine has compression, the plugs are sparking, fuel is being delivered and when they turn the engine over, it sounds like it wants to start, but never does. The fuel pump's working, in fact if anything it's working too well because during their tests they found, the plugs have a tendency to get covered in petrol. They've tested the fuel pump on a separate power supply and it works but their problem is, they're a general garage not a Volvo dealer. I did mention to their mechanic that I was going to publish this posting, asking for help, and he's quite happy for me to do so. The only other thing I should mention is the fuel pump again. About 12 - 18 months ago I noticed that the fuel gauge became very erratic. It could go from full to empty and back to where it should be, all in a matter of minutes. Then one Saturday afternoon, when our local garage was closed, having driven to our village supermarket, when I tried to go home, the car travelled all of 2 feet and then cut out. It turned over but wouldn't fire. On this occasion, I had to use RAC Rescue , they came out, diagnosed fuel pump failure, they recovered the car to the village garage forecourt and within a few days, all was well again, except the erratic fuel gauge still remains If anyone has any ideas as to what might be wrong, I'd be most grateful to know, as would my mechanic because he said he's at his wits end |
Mar 9th, 2018, 15:20 | #2 |
Senior Member
Last Online: Apr 18th, 2024 10:43
Join Date: Jan 2016
Location: Hayle
|
Faulty fuel gauges are it would seem, an extremely common fault with these cars. I highly doubt it's related in anyway to your non starting issue
------------ Has the garage connected the starter directly to the battery and tried to jump start the car that way? If they do, and it turns over and starts then you've got a problem between the starter motor and the ignition barrel. From there, there's only a few places to check for broken connections and wires. Last edited by Casheye; Mar 9th, 2018 at 15:23. |
The Following User Says Thank You to Casheye For This Useful Post: |
Mar 9th, 2018, 15:28 | #3 | |
New Member
Last Online: Jul 9th, 2018 18:51
Join Date: Mar 2018
Location: Scunthorpe
|
Quote:
It has a spark at each plug they tell me |
|
The Following User Says Thank You to David1956a For This Useful Post: |
Mar 9th, 2018, 15:36 | #4 |
Senior Member
Last Online: Apr 18th, 2024 10:43
Join Date: Jan 2016
Location: Hayle
|
Ok, have they disconnected the fuel line going to the fuel rail and turned it over to see if anything squirts out?
Alternatively, if you put your head under the car around the rear nearside passenger seat you should hear the fuel pump being primed when your turn the key before trying to start the car. If you don't see fuel or hear the pump being primed then it sounds like it is almost definitely the fuel pump relay. To check that you need to remove the ashtray, then pop out the cover in front of the fuses and then for ease of access you need to remove the tray above. Slide the cover for the cigarette lighter to one side and you'll see a screw you need to remove to take the tray out. The fuel pump relay should look like this... But it might be a different colour. By pass the relay and see if the engine starts or if you can at least hear the fuel pump and or fuel be delivered to the fuel rail. |
The Following 2 Users Say Thank You to Casheye For This Useful Post: |
Mar 9th, 2018, 16:15 | #5 | |
New Member
Last Online: Jul 9th, 2018 18:51
Join Date: Mar 2018
Location: Scunthorpe
|
Quote:
Just talked with the garage they have done that and fuel is getting through if any thing they think too much cos the plugs have petrol on them - the guy called that "wet plugs" |
|
The Following User Says Thank You to David1956a For This Useful Post: |
Mar 9th, 2018, 17:41 | #6 |
Senior Member
Last Online: Feb 23rd, 2020 19:46
Join Date: Oct 2015
Location: Erskine
|
I would suggest cleaning the mass airflow sensor as it is part of what regulates the fuel air mix. Any electrical contact cleaner, something that does not leave a residue, will do.
It is a 5 minute job and since you say too much fuel is getting in, that does suggest a problem with the fuel/air mix. |
The Following User Says Thank You to Delta66 For This Useful Post: |
Mar 10th, 2018, 08:33 | #7 | |
New Member
Last Online: Jul 9th, 2018 18:51
Join Date: Mar 2018
Location: Scunthorpe
|
Quote:
|
|
The Following User Says Thank You to David1956a For This Useful Post: |
Mar 10th, 2018, 13:29 | #8 |
VOC Member
Last Online: Today 02:56
Join Date: Feb 2008
Location: Gloucester
|
Do you get any response from the rev counter when you try to start the car? Another common failure point is the rpm sensor on top of the bell housing. This sensor is almost impossible to see through the rats nest of wires and pipes at the back of the engine. It is held in by one bolt which you must under no circumstances drop into the hole from which you remove the sensor.
|
The Following User Says Thank You to Forrest For This Useful Post: |
Mar 10th, 2018, 17:25 | #9 | |
New Member
Last Online: Jul 9th, 2018 18:51
Join Date: Mar 2018
Location: Scunthorpe
|
Quote:
Thanks for that idea I have passed that on to the garage guy I must say I really love the 940 so much so if it cannot be put right I will be buying another On that point what models came after the 940 that were as well built I ask cos I have read that later volvos are not so good build quality and long life Last edited by David1956a; Mar 10th, 2018 at 17:59. |
|
The Following User Says Thank You to David1956a For This Useful Post: |
Mar 11th, 2018, 06:47 | #10 |
Master Member
Last Online: Oct 8th, 2022 22:22
Join Date: Sep 2016
Location: Auckland
|
you need a new garage guy.
This is a VERY simple engine. If it is getting fuel (yes) and has a spark (apparently) and has compression (any competent mechanic would have checked) it WILL start. He is missing something obvious or is misled about what he is observing. |
The Following User Says Thank You to aardvarkash10 For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|