volvo cr 906 radio

chriskurton · Mar 15th, 2006, 13:27

how do i remove this radio? The cassettes in the cr906 get very hot - is this usual and safe?

migrator · Mar 15th, 2006, 14:00

At each side of the radio (from the front view) you should be able to see a vertical bar about 0.1 in wide. Using a coin or similar push each one in until you hear a click. When you then release it and take your coin away, the handle should come out part way. Pull the handles fully out and then pull the radio unit forward with a steady pressure. The whole unit should then come out followed by the wiring attachments.

Can't comment on your overheating cassettes though.

Do you have the user manual for this radio?

chriskurton · Mar 17th, 2006, 12:35

Thanks for the reply but I cannot see the verticle bars, all I can see are two slots
Ant ideas?

neil stevenson · Mar 17th, 2006, 14:14

Hi,
If you shine a light at the two slots you should see a metal clip on the outside of the radio. You need to fish with a couple of small flat screw drivers to pull the clips in towards the radio. Then using the cassette slot pull the radio towards you and out.
You should see the clips fairly easily with a bright torch and just pull them in towards the radio. Once you know where they are it is quite easy to get it out. Don't forget the radio and surround come out as one.

Cheers.

chriskurton · Mar 17th, 2006, 15:04

THanks for the info

Mar 15th, 2006, 13:27	#1
chriskurton New Member Last Online: Mar 5th, 2008 20:20 Join Date: Mar 2006 Location: Woodford Green	volvo cr 906 radio how do i remove this radio? The cassettes in the cr906 get very hot - is this usual and safe?

Mar 15th, 2006, 14:00	#2
migrator Aye - him again Last Online: Yesterday 18:17 Join Date: May 2001 Location: HAWICK	At each side of the radio (from the front view) you should be able to see a vertical bar about 0.1 in wide. Using a coin or similar push each one in until you hear a click. When you then release it and take your coin away, the handle should come out part way. Pull the handles fully out and then pull the radio unit forward with a steady pressure. The whole unit should then come out followed by the wiring attachments. Can't comment on your overheating cassettes though. Do you have the user manual for this radio? __________________ (Ouch - that's another knuckle ...) VOC 11817

Mar 17th, 2006, 14:14	#4
neil stevenson Senior Member Last Online: Jun 6th, 2017 14:09 Join Date: Oct 2000 Location: Carrowdore	Hi, If you shine a light at the two slots you should see a metal clip on the outside of the radio. You need to fish with a couple of small flat screw drivers to pull the clips in towards the radio. Then using the cassette slot pull the radio towards you and out. You should see the clips fairly easily with a bright torch and just pull them in towards the radio. Once you know where they are it is quite easy to get it out. Don't forget the radio and surround come out as one. Cheers. __________________ Neil Stevenson 2000 S40 1600cc. 940 SE Turbo Estate.(sold).

Mar 17th, 2006, 12:35	#3
chriskurton New Member Last Online: Mar 5th, 2008 20:20 Join Date: Mar 2006 Location: Woodford Green	Thanks for the reply but I cannot see the verticle bars, all I can see are two slots Ant ideas?

Mar 17th, 2006, 15:04	#5
chriskurton New Member Last Online: Mar 5th, 2008 20:20 Join Date: Mar 2006 Location: Woodford Green	THanks for the info

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)