|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
s40 1.6d driveE car cranks but no startViews : 326 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Feb 1st, 2024, 00:08 | #1 |
New Member
Last Online: Feb 1st, 2024 17:37
Join Date: Sep 2021
Location: Bolton
|
s40 1.6d driveE car cranks but no start
so my car is cranking but not really attempting to start, fuel filter is not blocked codes are reading P0193 (FUEL pressure sensor signal too high) P0183 (fuel temperature sensor signal too high) and Anti skid service required has also come up on the dash, for context I have just replaced the clutch in the car , wether this is relevent ie damage caused to sensor or wiring during this I'm not sure? has anyone any ideas ?
|
Feb 1st, 2024, 09:07 | #2 |
Member
|
Have you just removed or replaced the fuel filter when you say it's not blocked? These engines are really sensitive to any air in the fuel system so if you have replaced it you need to fill the filter to the brim with diesel and fill the pipes as best you can. Then take the fuel pipes off the engine and crank until you see diesel spurt from each before reattaching and trying to start the car.
__________________
Present: 2009 Volvo V50 1.6D DRIVe SE Past: 2004 Volvo S40 T5 SE |
Feb 1st, 2024, 10:55 | #3 | |
New Member
Last Online: Feb 1st, 2024 17:37
Join Date: Sep 2021
Location: Bolton
|
Quote:
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|