|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
Help with Vida ProblemViews : 679 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jul 12th, 2018, 16:33 | #1 |
New Member
Last Online: Jul 27th, 2018 12:07
Join Date: Jun 2018
Location: Kettering
|
Help with Vida Problem
Hi, I have just done a full scan on my 2006 XC90. I have the deaded
ANTI-SKID Service showing on my dash. On my full scane on the Diagram of the vehicle in Vida all my Lights in the diagram are showing GREEN and a Few Showing GRey which I think is correct. The thing is where would I go to find where the ANTI-SKID would be showing I have been every where but can not find it. Vida is getting me a bit puzzled. I thought it would stand out like a sore thumb. Any help from you Vida whizz boys would help. as I am getting a bit long in the tooth to work things out quickly Thanks now. |
Jul 13th, 2018, 12:13 | #2 |
Premier Member
Last Online: Today 20:13
Join Date: Feb 2017
Location: North East, Teesside
|
Not 100% sure but it might be within the SRS module.
__________________
Thread V40 T2 R-Design - https://www.volvoforums.org.uk/showt...56#post2901756 Thread V50 D2 R-Design - https://www.volvoforums.org.uk/showthread.php?t=264890 - CRASHED |
Jul 13th, 2018, 18:06 | #3 |
XJS Driver
Last Online: Apr 22nd, 2024 23:00
Join Date: Apr 2017
Location: Hitchin
|
This does seem odd - if you have an error message on the dash then would have thought at least one of the control modules would be showing yellow or red and you should have a list of DTCs when you click on them?
|
Jul 13th, 2018, 21:42 | #4 |
Premier Member
Last Online: Jan 15th, 2024 17:24
Join Date: Jun 2010
Location: Bury St Edmunds
|
Is the anti-skid message showing whilst VIDA is plugged in? That is normal.
__________________
Greg |
Jul 15th, 2018, 10:08 | #5 |
Premier Member
Last Online: Today 19:56
Join Date: Feb 2012
Location: Preston
|
The ABS light flashed whilst vida is communicating with the car.
From your description of the screen, it sounds like you are looking at the communication screen. Do you see 4 tabs at the bottom half of the screen? If so, click on the 'delivery' tab that should show you any fault codes. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|