C70 T5 Performance Exhaust ECU upgrade

[C70 Dave]

Hi

I know it is in here somewhere but I cannot find it,
I have a late hard top 2006 C70 T5 couple of questions if you could help out please
What is the best place/company/vendor for a performance ECU upgrade.
And what is the best performance exhaust to go for and from where.
And anyother performance upgrade suggestions would be helpfull.
Web adresses would be helpfull if you can

Many Thanks
Dave

[don kalmar union]

You can check...and order the Swedish made Ferrita exhausts that I stock here on my website: http://kalmar-union.com/parts/volvo-...0c70-exhausts/

Those prices include VAT and mainland delivery....extra for NI and some Scottish locations.

Regards, Don.

[C70 Dave]

Don
Thanks for your reply they look a good bit of kit and the price is not bad either but they will have to wait a little while.
Would there be any power increase in fitting a complete syetem, and does it make the car sound better get a bit of a growl.
Also i think you do chip remapping do you do one for my car, and if i had a chip remap would i need to get it done again after having the exhaust fitted to get the best out of it all.
Thanks
Dave

[don kalmar union]

Probably best to alter the software prior to replacing the exhaust.

I have sent you a pm.

Don.

[C70 Dave]

Don
sorry mate i cannot reply to your PM need over 30 posts but?
Don
Thanks for all the info mate how do I buy the MTE software does it come with all the needed cables etc where are the leads plugged in and how much is postage.
Also read that the ECU has to come out of the car is this correct
Thanks again
Dave

[don kalmar union]

You install the MTE Software yourself without needing to travel or take the ECU out of the car.

You need an older XP equipped laptop or one with Windows 7 (32 bit) and you connect it to your car's OBD port with MTE's unique Softloader device acting as an interface. I loan that Softloader against a fully returnable deposit of £155.

If you visit http://www.ipdusa.com/products/4669/...ent-flash-tune, the site of MTE's US distributor you will find links to several videos that go into some detail as to how the MTE Softloader system works.

You can email me: don@kalmar-union.com

Don.

[amatore]

Can I buy from anyone just the [MTE] software? I have the ipd interface and the 'MTE Vehicle

Identification' software. I just need the embedded software bundle that ipd/MTE send back

to the customer allowing him/her to write the tuned software to his/her ECU.

This is it:-
"You unzip the tuned file that you received back from ipd/MTE and run the setup folder

and you will get the MTE Softloader icon on your desktop, the files themselves will be in

C:\Program Files\MTE\MTE Soft-Loader."

I just want the contents of the setup folder!