|
850 / S70 & V70 '96-'99 / C70 '97-'05 General Forum for the 850 and P80-platform 70-series models |
Information |
|
Handbrake cable problemsViews : 765 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Aug 23rd, 2004, 08:00 | #1 |
Guest
Location:
|
Handbrake cable problems
Hi guys,
It has been a while since I posted a question here. My little beauty has been running very well..touch wood it will continue to do so. I just have one little problem to do with the adjustment of the handbrake. I adjust the handbrake and it works perfectly for 2 - 3 weeks and then I find that I have to take off the wheeels and adjust/tighten the whole lot up again. The handbrake cables are new (2 months old). Is there something failing that I need to replace. What about those "pistons" that I adjust everytime throught the brake disc? Could these be the source of my problem? Any help would be cery much appreciated. Best Regards, Colm |
Aug 23rd, 2004, 20:11 | #2 |
Jim
Last Online: Nov 30th, 2023 12:28
Join Date: Dec 2001
Location: Edinburgh
|
RE: Handbrake cable problems
You may have a similar problem to a recent posting (No.12528) where the linings parted from the shoes and were rotating in the drum and jamming, then if you back off the adjuster they free off and you have to adjust again, and so on!! The 'pistons' are just screw adjusters to set the linings close to the drums, they should be about a half turn off rubbing, but loosen the cable adjusters at the hanbrake lever first.
Good luck jim |
Aug 23rd, 2004, 23:00 | #3 |
Premier Member
Last Online: May 24th, 2022 14:21
Join Date: Dec 2001
Location: Wheathampstead
|
RE: Handbrake cable problems
Handbrake problems, they're so much fun! See my recent posting on the subject...
Best of luck. Alastair |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|