Standard Amazon Springs

[grantbennett2]

I`m looking for a full set of nearly new standard Amazon saloon springs

Thanks

[v8250]

Grant, I have a set on my Amazon that will be removed sometime in Oct [replacing with uprated set] They are good used condition and, importantly, sit correctly on the car. £20+p&p and they're yours. I'm in West Berkshire so only an hour from you and you'd be welcome to pick them up.

Rgds
Andrew

[amazon69]

Hi Andrew,

If Grant doesn't go for these A: he's a fool and B: I'll have them. Cheers,

Dave

[grantbennett2]

Yes please on the springs, Many thanks Andrew

[jakobandhismakarov]

If anyone's short, I have a full set of saloon springs which I took off my car a little while back.

I was after £30 for the set collected from Peterborough.

[v8250]

Originally Posted by grantbennett2

Yes please on the springs, Many thanks Andrew

Hi Grant, pls excuse delay only just seen your reply. They're all yours. Plan to change springs next month. Will pm you when done.

Hi Dave, if the above Grant's request changes I'll pm you as 2nd in line.

Rgds
Andrew

[swedishandgerman]

Originally Posted by amazon69

Hi Andrew,

If Grant doesn't go for these A: he's a fool and B: I'll have them. Cheers,

Dave

Dave I have a set of standard springs here somewhere if you're coming up to Exeter at all. Or I go down to Truro once a month

[grantbennett2]

Hi Andrew, do you have any idea how long your springs have been on your car?
Thanks
Grant

[jakobandhismakarov]

Originally Posted by grantbennett2

Hi Andrew, do you have any idea how long your springs have been on your car?
Thanks
Grant

The set I have were on my car five years before being removed.
Unsure of their age beyond that.

[v8250]

Originally Posted by grantbennett2

Hi Andrew, do you have any idea how long your springs have been on your car?
Thanks
Grant

Hi Grant, no idea...but importantly they ride correctly and sit at correct ride height. They have a nice rusty coating all over where usual paint covering has gone. If it was me I'd buzz them back, prime with a zinc etch primer and then 2x coats of epoxy/chassis black spray to bring them back to tiptop condition. Hope this helps.