Wheel fitment gurus required

Vintoni · Jul 4th, 2020, 13:31

Hi all

I have a 1997 940 LPT wagon. I also have some dished steelies.

I think I already know the answer to this but here goes anyway.

The wheels are 15X8 with a negative 35 offset and I would need adapters to alter the PCD which will add an extra 20mm. Will they fit with stretched tyres? Arches have already been rolled.

Thanks in advance

classicswede · Jul 4th, 2020, 13:52

you will need 20-25mm spacers to get them to clear

Vintoni · Jul 4th, 2020, 14:10

Yeah, the adapters will space them out 20mm. I'm just not sure they won't stick out too far past the arches...

Vintoni · Jul 4th, 2020, 16:53

Could get them drilled with 5X108 as well...

deeman940 · Jul 4th, 2020, 23:36

If you have ET15 they should easily fit with rolled arches, you shouldn't need too much of a stretch especially on 16's unless you are running it stupid low.
i have the same fitment except 17"

Vintoni · Jul 10th, 2020, 17:08

What do we reckon? Will they be OK with stretched tyres? Like I said, arches have been rolled...

mocambique-amazone · Jul 11th, 2020, 14:20

Quote:

Originally Posted by Vintoni

What do we reckon? Will they be OK with stretched tyres? Like I said, arches have been rolled...

This is with adapters?

Will never work without rubbing

M2C

Good luck, Kay

deeman940 · Jul 12th, 2020, 03:45

They look a little more than ET15!!

Jul 4th, 2020, 13:31	#1
Vintoni Junior Member Last Online: Feb 1st, 2024 19:49 Join Date: Aug 2019 Location: France	Wheel fitment gurus required Hi all I have a 1997 940 LPT wagon. I also have some dished steelies. I think I already know the answer to this but here goes anyway. The wheels are 15X8 with a negative 35 offset and I would need adapters to alter the PCD which will add an extra 20mm. Will they fit with stretched tyres? Arches have already been rolled. Thanks in advance

Jul 4th, 2020, 13:52	#2
classicswede Trader Volvo in my veins Last Online: Today 18:07 Join Date: Dec 2004 Location: Anglesey	you will need 20-25mm spacers to get them to clear __________________ http://www.classicswede.org www.classicswede.co.uk

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Jul 4th, 2020, 14:10	#3
Vintoni Junior Member Last Online: Feb 1st, 2024 19:49 Join Date: Aug 2019 Location: France	Yeah, the adapters will space them out 20mm. I'm just not sure they won't stick out too far past the arches...

Jul 4th, 2020, 16:53	#4
Vintoni Junior Member Last Online: Feb 1st, 2024 19:49 Join Date: Aug 2019 Location: France	Could get them drilled with 5X108 as well...

Jul 4th, 2020, 23:36	#5
deeman940 Master Member Last Online: Apr 4th, 2024 17:58 Join Date: Oct 2015 Location: watford	If you have ET15 they should easily fit with rolled arches, you shouldn't need too much of a stretch especially on 16's unless you are running it stupid low. i have the same fitment except 17"

Jul 12th, 2020, 03:45	#8
deeman940 Master Member Last Online: Apr 4th, 2024 17:58 Join Date: Oct 2015 Location: watford	They look a little more than ET15!!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)