master brake cylinders Q

Anadinolin · Feb 17th, 2015, 20:33

Does anybody know if the master brake cylinder different for those with abs and those without?

also disk brakes versus drums on the rear any difference there both no abs

Brake line fittings any differences from drum brakes to rear calipers, dosent make sense to have any and just make one set of lines accross the range?

Handbrake operation, is the cable the same length from the join for rear wheels on disks and drums?

Ian Fife · Feb 18th, 2015, 08:27

Lots of questions!!

No certain answers from me I'm afraid, but I suspect there will be some differences of all of the components between models of 400s if the specs. of the systems are different? If you peruse the Haynes Manual then you should be able to get a bit more info., and you could always search on well known car websites and compare the recommended part numbers for different models?

I doubt if many of us have comprehensive knowledge of the whole range and are able to make this comparison (with one or two possible exceptions perhaps).

IanF

Feb 17th, 2015, 20:33	#1
Anadinolin VOC Member Last Online: Jun 20th, 2022 14:32 Join Date: Oct 2009 Location: Upminster View Photos By: Anadinolin	master brake cylinders Q Does anybody know if the master brake cylinder different for those with abs and those without? also disk brakes versus drums on the rear any difference there both no abs Brake line fittings any differences from drum brakes to rear calipers, dosent make sense to have any and just make one set of lines accross the range? Handbrake operation, is the cable the same length from the join for rear wheels on disks and drums? __________________ what good music deserves is full deep bass to give it warmth. the stock volvo sub works....just at high volumes Drum n Bass and dubstep

Feb 18th, 2015, 08:27	#2
Ian Fife Senior Member Last Online: Today 13:20 Join Date: Jan 2006 Location: Inverkeithing	Lots of questions!! No certain answers from me I'm afraid, but I suspect there will be some differences of all of the components between models of 400s if the specs. of the systems are different? If you peruse the Haynes Manual then you should be able to get a bit more info., and you could always search on well known car websites and compare the recommended part numbers for different models? I doubt if many of us have comprehensive knowledge of the whole range and are able to make this comparison (with one or two possible exceptions perhaps). IanF

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)