Abs/anti-skid service

[doolie]

Originally Posted by SwissXC90

Unfortunately this highlights the dangers of making assumptions.

Instead of assuming, one should use diagnostic equipment and be certain where the problem lies, before picking up the first screwdriver.

Your 100% correct !

[doolie]

So heres what vida reads after scanned, cleared and driven for 10 mins and then rescanned.....

[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

[SwissXC90]

Well that is very clear.

Fix the problem with the front left wheel sensor.

That's where your problem lies.
That's what is causing the Abs/anti-skid service message.

[cheshired5]

Originally Posted by doolie

So heres what vida reads after scanned, cleared and driven for 10 mins and then rescanned.....

What does Vida then go on to say about possible causes if you scroll down on the 3rd screen and have you investigated all of the possible causes?

[doolie]

Originally Posted by cheshired5

What does Vida then go on to say about possible causes if you scroll down on the 3rd screen and have you investigated all of the possible causes?

[IMG][/IMG]

[cheshired5]

There are 4 possible causes.....

Loose sensor
Damaged wiring (look for damage on the sensor too)
Defective ring
Dirt between ring and sensor

Assume nothing and check everything.
For example, have you compared old and new rings for an identical match?

[doolie]

Went to remove front wheel today locking nut sheared....😭

[doolie]

[IMG][/IMG]

[harveys]

The brake pressure sensor will cause a Dim message

[S60D5-185]

Originally Posted by doolie

Went to remove front wheel today locking nut sheared....😭

Well documented on here as to just how poor these McGard ( presumably ) locking nuts are.

That will be hard work to remove but get rid of the other 3 once done and replace with standard nuts.

You may be able to get a bolt welded onto the remains of that wheel nut and get it off that way.

Good luck.