|
Diesel Engines A forum dedicated to diesel engines fitted to Volvo cars. See the first post in this forum for a list of the diesel engines. |
Information |
|
2011 V60 d5 Won't startViews : 714 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Aug 5th, 2020, 06:06 | #1 |
New Member
Last Online: Dec 22nd, 2021 09:17
Join Date: Jan 2020
Location: Melbourne
|
2011 V60 d5 Won't start
Hi
Have a little problem with my car. Well hoping it is a little problem. Was working fine with no problems. Then this morning it won't start. Engine turns over but no ignition. Wondering if it might be a relay. Checked all fuses and nothing blown. Hoping it isn't a fuel pump. If it is how can I test that? Tank is full. Battery is good. No messages or check engine light on. Checked all the relays I can get too under the hood and in the boot and they all tested fine with a multi meter. Maybe I had already tested the fuel pump relay but I can't find any wiring diagrams for the v60 d5 on the net. So I don't know which one does what. Owners Manuel is no help. Can any body tell me where the fuel pump relay is on the 2011 V60 d5? Would cold weather affect it. Any help would be great. thanks 2011 V60 D5 AWD |
Aug 7th, 2020, 21:59 | #2 |
New Member
Last Online: Dec 22nd, 2021 09:17
Join Date: Jan 2020
Location: Melbourne
|
Anybody have any suggestions?
Thanks |
Sep 24th, 2020, 00:31 | #3 |
Premier Member
Last Online: Today 15:09
Join Date: Oct 2011
Location: Groningen
|
Besides an engine light there can be more faultcodes wich can be made visible with vida or the torque app
Do that first..... if you have fuelpressure codes check connectors (they are crappy) on the railpressure regulator and measure resistance on the sensor itself(i dont know where the relay of the prime pump is on this model the primepump can be heard buzzing with contact on preferably with not much fuel in the tank or put a pressuremeter in de feed line to check if it builds up pressure (even if its activated and buzzing it can go broke). Check the fuel filter on blockage If thats all ok do a leakback test on the injectors and a fuelcorrections readout on the injectors. Other codes could be if circuits are open for the electrical wires of the injectors. Reading out fuelpressure while cranking the engine is also informative with torque or vida The idle fuelpressure for this engine i dont know but it has to be 350 bar or higher The "cold"in this time of year is no issue for starting because at these temperatures the glowplugs arent activated (if you live at great heights it could be needed at these temperatures) and to be checked but i asume its not (you live in australia if its above 5 degrees celcius it should be ok or if its borderline if you crank long enough there will be more compression heat buildup and the engine will start if the plugs are the culprit) Last edited by 5cilinder; Sep 24th, 2020 at 00:55. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|