|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
Anti-skid service required/Brake pressure sensorViews : 274 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Apr 30th, 2023, 18:23 | #1 |
Member
Last Online: Mar 26th, 2024 21:43
Join Date: Sep 2019
Location: manchester
|
Anti-skid service required/Brake pressure sensor
I currently have this intermittent warning on my v70 DIM
Vida code is BCM-130 brake pressure sensor 1 to low. (And no codes on a generic OBD reader for ref) Through live monitoring I’ve confirmed that the readings are different between the two sensors, and the issue follows the sensor when swapping the wiring. I can get rid of the message temporarily by running a BCM calibration with Vida. But it does come back so sensor is definitely starting to drift. Question is: what is the actual impact of the message? Does it disable any features like traction control or dtsc? As far as I belive - it’s not an MOT failure as it’s not lit up the ABS or brake warning lights. |
Apr 30th, 2023, 18:47 | #2 |
trying to be helpful
Last Online: Today 03:36
Join Date: Aug 2020
Location: Dagenham
|
when mine went it stopped cruise working, if that makes any difference to you
I don't have the other things so couldn't comment other than that |
The Following User Says Thank You to stuart bowes For This Useful Post: |
Apr 30th, 2023, 19:12 | #3 |
Premier Member
Last Online: Yesterday 23:41
Join Date: Dec 2017
Location: North of Hadrian's Wall & South of Antonine's Wall
|
Can be caused by low voltage, also by dirty contacts at the plug, or it may be a faulty sensor
__________________
MY2010 XC90 SE (M66-manual) Magic Blue (467) Sold MY1997 850 GLT (62,000 miles) Silver Sand (419) MY2005 V70 2.5T (66,000 miles) Willow Green (471) Volvo 850 GLT website |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|