|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
New Model S40/V50 Alloy WheelsViews : 1045 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 16th, 2006, 06:28 | #1 |
Former Support Team
Last Online: Jan 26th, 2024 11:26
Join Date: Jan 2006
Location: Nr Norwich
|
New Model S40/V50 Alloy Wheels
Just a tip to anyone out there with a new model (focus based) S40/V50!
Take the time to jack the car and take ALL the wheels off (one at a time of course!!) and put a little copper slip or the like round the centre locating spigot. Its just taken me over 10 minutes a side to get the front wheels of my 2005 model S40 (to check the pad thickness), lots of swearing etc. The alloy is a tight fit on the steel locating spigot, and the two different metals are reacting, growing together. A little time spent now might save a lot of grief if you should get a puncture, needing to get the wheel off in the dark and rain (whenever else do punctures occur?) by the roadside!
__________________
Alec. (My other car is a WD 2-10-0) |
Jun 16th, 2006, 18:43 | #2 |
Speed freak
Last Online: Apr 3rd, 2020 22:04
Join Date: Nov 2003
Location: Yorkshire
|
It not just S40/V50's that need it, all cars with alloys are the same
Some wheels we have to get off cars some times i wouldn't like to be the customer with the crappy little jack trying to wheels off when they are seized to the hubs
__________________
04 XC90 D5 --- Big bus 00 pug 306HDi --- Run about 88 pug 309GTi --- Project track car 07 CB600 Hornet --- 2 wheel fun |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|