More 850 T5 Queries - Page 2

GaryS · Sep 25th, 2002, 22:01

On the subject of the front windows, if the switch module is the same as in the V70 then they are prone to failure.
It will eventually fail !!!
About £85.00 to replace. I've had it done.

sheerwater · Sep 28th, 2002, 23:18

Similar thread on clutch squeel problems on the 940/v90 site. one small point to check if changing clutch. Volvo garage changed my friends clutch but the thrust bearing was also damaged. Of course when doing a clutch you should check the bellhousing but working with the right gear you are probably only checking the clutch itself and not looking at the crud in the bottom of the bellhousing. A couple of balls from the race were however left in the ballhousing with the most wonderful results!!!Cheers Nigel

Simon Linton · Sep 29th, 2002, 09:55

Before replacement, use contact cleaner in situ and if no cure, remove and clean - my driver's window went intermittent due to muck falling into the switch.

Sep 29th, 2002, 18:51

Thanks everyone.

The window problem has been resolved as advised in situ - so no need to remove the console!

Sep 25th, 2002, 22:01	#11
GaryS Junior Member Last Online: Jun 24th, 2007 19:50 Join Date: Jan 1970 Location: Carterton	RE: More 850 T5 Queries On the subject of the front windows, if the switch module is the same as in the V70 then they are prone to failure. It will eventually fail !!! About £85.00 to replace. I've had it done.

Sep 28th, 2002, 23:18	#12
sheerwater Master Member Last Online: Feb 24th, 2019 17:59 Join Date: Dec 2001 Location: Northampton	RE: 850 T5-R and R clutch Similar thread on clutch squeel problems on the 940/v90 site. one small point to check if changing clutch. Volvo garage changed my friends clutch but the thrust bearing was also damaged. Of course when doing a clutch you should check the bellhousing but working with the right gear you are probably only checking the clutch itself and not looking at the crud in the bottom of the bellhousing. A couple of balls from the race were however left in the ballhousing with the most wonderful results!!!Cheers Nigel

Sep 29th, 2002, 09:55	#13
Simon Linton 850/70 Register Keeper Last Online: Apr 24th, 2008 19:02 Join Date: Dec 2000 Location: Leicester	RE: 850 swittch module Before replacement, use contact cleaner in situ and if no cure, remove and clean - my driver's window went intermittent due to muck falling into the switch.

Sep 29th, 2002, 18:51	#14
KevinG Guest Location:	RE: 850 swittch module Thanks everyone. The window problem has been resolved as advised in situ - so no need to remove the console!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)