|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
DIM problemsViews : 464 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Sep 17th, 2020, 18:21 | #1 |
Senior Member
Last Online: Apr 2nd, 2024 15:50
Join Date: Dec 2003
Location: Oise
|
DIM problems
The instrument cluster doesn't show any life, was working yesterday morning, but in the afternoon with key on there are no dials or lights. Engine runs and drives ok.
Read the codes in Vida, DIM-E001 Control module faulty communication DIM-E003 Configuration fault SRS-00D5 Lamp fault Cleared the codes, first drive seemed to be ok, but about a mile in, the mileage trips stopped reading then the fuel and temp gauges and then speed and rpm stopped, reread codes and the same. Is this a dry joint in the DIM perhaps, all other items seem to working, indicators, lights, car runs and drives ok. The DIM has been repaired by Volvo Diagnostics in London before and has worked fine since then. The SRS lamp did light before everything went black. Is there something I can check, as it will be a long shot to send it back to Diagnostics to fix. John |
Sep 17th, 2020, 19:21 | #2 |
Premier Member
Last Online: Dec 26th, 2021 13:42
Join Date: Dec 2013
Location: Crewe
|
The only common possibility is CAN wiring so check everything between the DIM and the CEM.
Maybe pull the CEM to check for corrosion too.
__________________
2002 S60 SE D5 Manual 209000 miles |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|