|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
v50 2.4i: "012C CAN signal. Configuration fault" errorViews : 3252 Replies : 9Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jul 30th, 2012, 14:05 | #1 |
Junior Member
Last Online: Sep 14th, 2012 08:19
Join Date: Mar 2012
Location: Stanley
|
v50 2.4i: "012C CAN signal. Configuration fault" error
012C CAN signal. Configuration fault
Above error code shows on my 2004 V50. I can clear the code with my diagnostic tool, but once I restart the engine it reappears. If I clear the code then go for a drive, it quite often won't reappear whilst driving - it will only come back when I've stopped the car and had to restart it. Any suggestions? |
Jul 30th, 2012, 14:08 | #2 |
Looney
Last Online: Mar 29th, 2017 14:56
Join Date: Nov 2011
Location: Here n there
|
Do you know what the code means, what is it telling you is wrong?
__________________
I get into a pink Volva whenever I like, my S70 is coral red metallic. Volvo S70 SE auto 1998 vintage |
Jul 30th, 2012, 14:15 | #3 | |
Junior Member
Last Online: Sep 14th, 2012 08:19
Join Date: Mar 2012
Location: Stanley
|
Quote:
Whoops sorry, just realised it's cut the end of my title. It should say this is an SRS / airbag error code |
|
Aug 3rd, 2012, 11:00 | #4 |
Junior Member
Last Online: Sep 14th, 2012 08:19
Join Date: Mar 2012
Location: Stanley
|
Anyone any ideas?
|
Aug 3rd, 2012, 16:52 | #5 |
Brit in Germany
Last Online: Yesterday 19:48
Join Date: Jan 2011
Location: Bremen
|
Have you had the ends of the dash board off lately? Unplugged the airbag switch by accident?
__________________
The Best Nation Is Imagination 2010 V70 (Type 135) D5 (D5244T10) Automatic (TF-80SC) |
Aug 19th, 2012, 07:16 | #6 |
Junior Member
Last Online: Sep 14th, 2012 08:19
Join Date: Mar 2012
Location: Stanley
|
I haven't but I've only had the car since March. I'm currently on holiday in France and one morning the warning light didn't appear for hours, so it mustn't be a constant fault?
|
Aug 19th, 2012, 08:27 | #7 |
VOC Member
Last Online: Sep 11th, 2019 14:36
Join Date: Aug 2008
Location: Blackpool
|
Check the plugs under the seats
|
Aug 19th, 2012, 09:41 | #8 |
Experienced Member
Last Online: Yesterday 23:35
Join Date: Jun 2007
Location: L/H side
|
This code indicates a mismatch of the SRS module to the CEM module , it needs dealer attention , a software re load of one or other modules may help ..
__________________
My comments are only based on my opinions and vast experience . |
Aug 20th, 2012, 08:07 | #9 |
Junior Member
Last Online: Sep 14th, 2012 08:19
Join Date: Mar 2012
Location: Stanley
|
Cheers Clan. Would this be the case even though very occasionally the warning light doesn't come on? If it was a mismatch wouldn't the warning be there constantly?
|
Aug 20th, 2012, 18:48 | #10 |
Experienced Member
Last Online: Yesterday 23:35
Join Date: Jun 2007
Location: L/H side
|
I havent seen this code before so not sure on that ..
__________________
My comments are only based on my opinions and vast experience . |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|