|
S40 / V40 '96-'04 General Forum for the Volvo S40 and V40 (Classic) Series from 1995-2004. |
Information |
|
V40 2000 won't start after replacing instrument panel lightsViews : 648 Replies : 7Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Sep 14th, 2018, 11:37 | #1 |
New Member
Last Online: Sep 17th, 2018 01:14
Join Date: Sep 2018
Location: Melbourne
|
V40 2000 won't start after replacing instrument panel lights
G'day!
New here, joined the forums after discovering a handy guide for replacing the bulbs behind the instrument panel cluster. Spent a few hours yesterday taking the necessary panels off under the steering to squeeze out the instrument cluster and replace the blown bulbs as for a long time I haven't been able to see my speed under 60km/h at night, as well as the lights behind the AC controls and some other accessories as a number had blown and never been replaced since new. Replacing bulbs with LEDs was a success, but after bolting everything back together this morning I was unable to start the engine. The starter turns over but it won't catch. It's definitely not the battery as all peripherals are working fine, though I tried using a battery jump starter initially anyway to no success. It's fair to say I'm a bit baffled - spent taking off panels again and seeing if I'd dislodged any wires or connectors along the steering column or key barrel but I can't see much evidence of anything out of place, other than a mechanical lever connected to the shiftlock override which was dangling when I opened up the steering covers initially (see pic). It's definitely not the immobilizer as I've got another dummy key with no chip which I tested, which successfully triggers the immobilizer on ignition and won't let the engine turn over, where as the normal programmed key will simply continue turning without starting. I believe the part hanging down should be secured by a plate or something, but that wasn't there when I opened it in the first place. A mate brought his bluetooth ODB2 tool over, but for some reason wasn't able to get any information from the ECU - the connection kept dropping and when it didn't it diagnosed 0 faults which is definitely wrong given I had a service 2 weeks ago and the mechanic informed me of a couple he wasn't able to solve related to the electronic systems. I'm highly doubtful that it's anything in the engine bay that is wrong, as I've changed nothing in the last few days in there... but I could be wrong. I'm not massively knowledgeable in car related matters, so there's likely something I'm missing. Anyone have any ideas? Model: V40 2000, 2.0L Auto TLDR; Changed instrument panel lights to LEDs, now car won't start - turns over but won't catch.
__________________
Volvo V40 2000 2.0L Auto
|
Sep 14th, 2018, 13:04 | #2 |
Premier Member
Last Online: Apr 13th, 2022 09:41
Join Date: Jul 2014
Location: Beccles
|
I could be wrong, but if that grey piece is the immobilizer antenna then in its current position it may be too far away from the key to read the chip contained inside said key when it's in the ignition, as I say I could be wrong though.
__________________
02 V40 T4 S, "Sargent silver" she's back!
|
Sep 14th, 2018, 18:49 | #3 |
Premier Member
Last Online: Apr 13th, 2022 09:41
Join Date: Jul 2014
Location: Beccles
|
Ahh, just read properly, not that then, it does point to something maybe not plugged in properly or making good contact though, I only say that as when I had my instrument panel out I needed to just pull the car back slightly to let someone else get out of the drive, and trying to do it with the clocks out did the same as this, just spun over, so I had to plug everything back in, move the car 10 feet and then take it out again.
__________________
02 V40 T4 S, "Sargent silver" she's back!
|
Sep 17th, 2018, 00:11 | #4 | |
New Member
Last Online: Sep 17th, 2018 01:14
Join Date: Sep 2018
Location: Melbourne
|
Quote:
Think I'm just gonna have to get it towed to my local Volvo service.
__________________
Volvo V40 2000 2.0L Auto
|
|
Sep 17th, 2018, 01:11 | #5 |
Master Member
Last Online: Aug 25th, 2022 16:37
Join Date: Jul 2013
Location: Derry
|
I would try a few zip ties to clamp the bit that is hanging down back to where it should be. If only to rule it out.
__________________
2008 S60 D5 SE LUX |
Sep 17th, 2018, 12:14 | #6 |
Experienced Member
Last Online: Today 16:01
Join Date: Jun 2007
Location: L/H side
|
The bit hanging down is the gearlever interlock , maybe it is not quite in neutral so will not start , clip it back in !
__________________
My comments are only based on my opinions and vast experience . |
Sep 18th, 2018, 16:54 | #7 |
Member
Last Online: Aug 1st, 2019 19:17
Join Date: Aug 2013
Location: Dorset
|
Just a left field view here, but the fact it's actually cranking rules out anything to do with the auto gearbox inhibitor in my eyes, and I can't see anything behind the dash affecting the starting..... When was the timing belt last done?
__________________
Current: 2003 VW Passat 1.9TDI, 1979 Saab 99 turbo, 1968 MGB GT, |
Sep 27th, 2018, 10:49 | #8 |
Junior Member
Last Online: Sep 29th, 2021 11:35
Join Date: Apr 2015
Location: Wellington
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|