|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
S40 1.6d cutting outViews : 753 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Apr 27th, 2013, 21:16 | #1 |
New Member
Last Online: May 10th, 2013 18:20
Join Date: Apr 2013
Location: Nottingham
|
S40 1.6d cutting out
Hi I have a 2007 s40 1.6d, I had problems with dpf now that is all sorted, since then its been spot on till last few days, I can be driving along at any rev range and the car just cuts out if I turn key on and off its goes back fine then happens again it does it more at higher revs. I get no warning lights on or messages, some times it also goes into limp mode again turn key on and off goes back fine, would be really great full with help please. Iv checked all plugs vacuum pipes ect it also had a full service 2months ago
|
Apr 27th, 2013, 22:01 | #2 |
VOC Member
Last Online: Feb 26th, 2016 19:58
Join Date: Aug 2011
Location: Exmouth
|
You need to get codes read and this should point in the right direction.
It could be something like a cam/crank sensor as this could cause engine to cut out, I'd also do a check on the battery to ensure the terminals are on tight. |
Apr 28th, 2013, 07:18 | #3 |
New Member
Last Online: May 10th, 2013 18:20
Join Date: Apr 2013
Location: Nottingham
|
Ok will do. Do most diagnostic machines will get the codes up. Will also check battery today.
|
Apr 28th, 2013, 10:02 | #4 |
Senior Member
Last Online: May 16th, 2015 22:08
Join Date: Jan 2011
Location: Bristol
|
As Sony as said above. The fact that the car is going into limp mode is helpful because it will be logging a fault code.
__________________
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|