|
Information |
|
Window seal needed for my 145Views : 1294 Replies : 6Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jan 24th, 2011, 21:58 | #1 |
New Member
Last Online: Dec 8th, 2023 20:49
Join Date: Jan 2011
Location: Zwolle
|
Window seal needed for my 145
Is there anybody who can help me find window seals for the windows in the back of the 145.
My 145 has dual windows at each side and the one at the end can be opened. the windows are like in the picture below The seals of all four windows are worn out and hard to find. Regards Caspar Remmers |
Jan 25th, 2011, 07:53 | #2 |
VOC Member
|
Mmm, that might be difficult. The opening rear side window on the 145 was replaced quite early in the production run by the single peice window.
Are you looking for new, or would good used seals be OK? John |
Feb 1st, 2011, 22:21 | #3 |
New Member
Last Online: Feb 16th, 2012 19:42
Join Date: Oct 2010
Location: dublin
|
try www.skandix.de or www.scandcar.nl . they might do them? nice car, same as mine except for the split rear windows..
|
Feb 3rd, 2011, 18:11 | #4 | |
New Member
Last Online: Dec 8th, 2023 20:49
Join Date: Jan 2011
Location: Zwolle
|
Quote:
Im aiming for used seals because it is almost impossible to get a new set Can you help me out? |
|
Feb 3rd, 2011, 18:14 | #5 | |
New Member
Last Online: Dec 8th, 2023 20:49
Join Date: Jan 2011
Location: Zwolle
|
Quote:
I already tried scandcar but they are out of these seals The German site I never tried, I'll check it out Caspar |
|
Feb 7th, 2011, 10:19 | #6 |
Trader Volvo in my veins
Last Online: Today 14:37
Join Date: Dec 2004
Location: Anglesey
|
I very much doubt you will get good second hand seals for one of these. I have the same problem to resolve.
For The fixed window I'm going to have to cut down the seal from a later full size window. For the opening window I will have to use some std profile seals from here http://www.woolies-trim.co.uk/c-14-rubber.aspx or one of teh other suppliuers |
Feb 14th, 2011, 11:25 | #7 |
New Member
Last Online: Dec 8th, 2023 20:49
Join Date: Jan 2011
Location: Zwolle
|
Thanks classic wede,
I didn't know there were such broad variaty ofrubber profiles for sale, I alway thaught it was like the realy standard ones Thanks for your reply Caspar |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|