|
850 / S70 & V70 '96-'99 / C70 '97-'05 General Forum for the 850 and P80-platform 70-series models |
Information |
|
Another ABS thread.....Views : 2295 Replies : 45Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Feb 8th, 2024, 17:08 | #41 | |
Member
Last Online: Yesterday 17:25
Join Date: Aug 2020
Location: N/A
|
Quote:
|
|
Feb 8th, 2024, 17:22 | #42 |
Premier Member
Last Online: Yesterday 09:37
Join Date: Jan 2011
Location: Horne (Nr. Horley)
|
Just added enough new solder to make the joints flow properly, but without leaving huge gobs of solder on each joint, and it's of course essential to make sure that no solder is bridging across pins.
Don't forget what I said about using fine guage leaded solder if you can, also I did mine under an illuminated bench-standing magnifying glass, so if you can obtain or borrow one of those it'll make the job even easier. Mine was one that my better half uses for sewing!
__________________
Some people are like Slinkies, they serve no useful purpose but they still bring a smile to your face when you push them downstairs. |
The Following User Says Thank You to Luxobarge For This Useful Post: |
Feb 10th, 2024, 17:07 | #43 | |
Member
Last Online: Yesterday 17:25
Join Date: Aug 2020
Location: N/A
|
Quote:
|
|
Feb 10th, 2024, 21:35 | #44 |
Premier Member
Last Online: Yesterday 09:37
Join Date: Jan 2011
Location: Horne (Nr. Horley)
|
Yes, that should be fine - it's exactly what I used, haven't got much left now though!
__________________
Some people are like Slinkies, they serve no useful purpose but they still bring a smile to your face when you push them downstairs. |
Feb 13th, 2024, 16:19 | #45 | |
Member
Last Online: Yesterday 17:25
Join Date: Aug 2020
Location: N/A
|
Quote:
What did you use to reseal the module and did you bother with adding back the clear membrane that covers the PCB? |
|
Feb 13th, 2024, 16:40 | #46 |
Premier Member
Last Online: Today 10:05
Join Date: Sep 2017
Location: STANDISH LANCASHIRE
|
I find a little more flux is useful even when pre-fluxed solder is used-clean the finished area.
If the membrane has been peeled away then you can just push it back into place.. I wipe the area lightly with a water repellent (GT 85 or similar) prior to the above. A polyurethane adhesive/sealant is also useful to fasten the removed cover.. it can be cut away quite easily if you need to go back into the unit. ----------------------- " -------------------- A forum search on this subject will give the product name for the membrane originally used- not absolutely necessary though. Good Luck. Bob. |
The Following User Says Thank You to Bob Meadows For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|