Engine 850: B5234TR/2.3/20v/T5R: Dyno Run 850R 1996 with RICA

[winsox]

Originally Posted by winsox

Hold on ill go out and pull it now..

Dave

Does this help?

[y2blade]

I don't see why some are trying to p*** on your chips, and have to pick holes in other peoples happiness


OP At the end of the day if you are happy then that is all that matters.
great car mate...enjoy it.

Thanks for posting the graph

[mole]

Originally Posted by t5frankie

i took my car on a maha dyno same as that one and it said i had 100bhp drag loss lol and only 198whp, load of rubbish. with an auto its power at the wheels only you can calculate and 203 at the wheels is very low for a remapped 850r mate it should be 245 at the wheels, do you know what boost its running? where does the needle hit on the volvo boost gauge? I have a rica with no stickers at all

If you don't understand then it might be better to ask rather than dismiss it, you are wrong.

[winsox]

Originally Posted by y2blade

I don't see why some are trying to p*** on your chips, and have to pick holes in other peoples happiness


OP At the end of the day if you are happy then that is all that matters.
great car mate...enjoy it.

Thanks for posting the graph

Im now thinkin is it normal or did the guy I bought it off take the chip and just tell me it had it ?!!??

[winsox]

Originally Posted by mole

If you don't understand then it might be better to ask rather than dismiss it, you are wrong.

I have a boost gauge and that reads 1.1 Bar when i stuff my foot down..

[mole]

Originally Posted by winsox

I have a boost gauge and that reads 1.1 Bar when i stuff my foot down..

I don't doubt it.

[t5frankie]

Originally Posted by mole

If you don't understand then it might be better to ask rather than dismiss it, you are wrong.

dont really get your point mate, i took it to another dyno and made 311bhp and 286whp a bit more accurate wouldnt you say with a 19t running 1.3 bar?

[t5frankie]

Originally Posted by winsox

I have a boost gauge and that reads 1.1 Bar when i stuff my foot down..

1.1 bar is right for what it should be boosting to with a rica but that figure of 203whp doesnt equate to 1.1 bar mate ask anyone on vpc, 203 whp is roughly standard

[winsox]

Originally Posted by t5frankie

1.1 bar is right for what it should be boosting to with a rica but that figure of 203whp doesnt equate to 1.1 bar mate ask anyone on vpc, 203 whp is roughly standard

The volvo boost gauge goes about 3 mm out of the white to the right when my other gauge says 1.1.

Im wondering if the Dyno is incorrect ..could this be a possiblilty ?

The car feels like a rocket ship...I think i will by a standard ECU and try it .

[t5frankie]

Originally Posted by winsox

The volvo boost gauge goes about 3 mm out of the white to the right when my other gauge says 1.1.

Im wondering if the Dyno is incorrect ..could this be a possiblilty ?

The car feels like a rocket ship...I think i will by a standard ECU and try it .

if it feels like a rocketship and it would at 1.1 bar then its ok but that dyno result is wrong, it measured mine at 198whp and i did it somewhere else and it was 286whp, the maha said i had 100bhp drag loss lol