|
Information |
|
Original B20B SU carburettor setViews : 849 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Mar 8th, 2021, 23:04 | #1 |
Junior Member
Last Online: Dec 14th, 2021 00:14
Join Date: Oct 2020
Location: Chelmsford
|
Original B20B SU carburettor set
This is a set of SU parts from a 1968 B20B 145S. I think there's very little missing plus some few spares because my engine was tuned and I recalibrated them, so original calibration + extras, with one spring required. The bodies are good as in my experience the pistons dont wear badly because they are clearance fit to the bell housings. An SU refresh kit of gaskets and jets would be advised. There's several jets but the link-tube stiffens with age. The jet tends to wear more than the needle because the needle is spring-loaded against one point of the jet. It looks like one new spring is required: adding sections of extra cut spring is an SU calibration technique that I used.
£23 inc. shipping. |
Apr 12th, 2021, 01:07 | #2 |
Senior Member
Last Online: Mar 17th, 2024 12:29
Join Date: Dec 2015
Location: eastsussex
|
Hi
can I have these please I will PM you my number Thanks |
Jul 17th, 2021, 10:54 | #3 |
Junior Member
Last Online: Feb 18th, 2024 16:13
Join Date: Dec 2012
Location: Bath
|
Hi , Have you sold the carbs now if not send reply please
|
Jul 19th, 2021, 23:01 | #4 |
Junior Member
Last Online: Dec 14th, 2021 00:14
Join Date: Oct 2020
Location: Chelmsford
|
Hi Annika. Sorry to disappoint, I am deliquent in marking these as sold. Mike
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|