|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
![]() |
|
Outside Air Temp Sensor Faulty?Views : 987 Replies : 3Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Junior Member
Last Online: Jun 18th, 2015 14:10
Join Date: Sep 2011
Location: Cardiff
|
![]()
Having had some good advice on here recently on another issue, I thought I`d try you knowledgeable people with this one.......
The outside air temperature sensor (mostly) gives a false reading; it under-reads by between 5 and 10 degrees. I know how to change the sensor (located in the door mirror) but before doing so wondered if anyone else had resolved this by (for example) finding a dodgy connector. No point in replacing the sensor if it is not faulty....... Or are the sensors known to be failure-prone? It`s MY05 163bhp D5. Thank you in anticipation. |
![]() |
![]() |
![]() |
#2 | |
Experienced Member
Last Online: Today 00:18
Join Date: Jun 2007
Location: L/H side
|
![]() Quote:
__________________
|
|
![]() |
![]() |
The Following User Says Thank You to Clan For This Useful Post: |
![]() |
#3 |
Premier Member
Last Online: Jun 5th, 2024 17:42
Join Date: Dec 2002
Location: Renfrewshire
|
![]()
Mine went faulty, and was reading below what it should be. I replaced it and it now reads OK. There are two sensors, one under each mirror but the one which sorted mine was under the drivers(RHD) mirror.
__________________
Tek-Emo Villis Emo Bis V70 SE NAV 1.6 D2 2015MY POWERSHIFT, D4162T, 93000miles, RED. /VOL FCR/PEPER OBD2/Acron 9135 OBD2/L.E.D Flasher/VDASH/ANCEL BA301/Topdon Top Scan |
![]() |
![]() |
The Following User Says Thank You to ShadeTek For This Useful Post: |
![]() |
#4 |
New Member
Last Online: May 31st, 2015 13:19
Join Date: Jul 2014
Location: Curdworth
|
![]()
I have the same problem on my 2005 V50 - it sends the A/C haywire.
Anyone manage to get hold of the service bulletin for this issue. Apparently a corrosion issue in the door connector and the fix is to replace the door loom with new one that has gold plated connectors. Some people manage to fix it by cleaning out the connectors. |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|